| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Pinch Weld pics http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=20465 |
Page 1 of 1 |
| Author: | o8k [ Sun May 06, 2007 6:06 pm ] |
| Post subject: | Pinch Weld pics |
Ive read a lot about this pinch weld that needs to get smashed down to make large tires fit. Could someone please post a pic of the pinch weld lve looked around in there and cant find what everyone it talking about. |
|
| Author: | Skipperb [ Sun May 06, 2007 6:32 pm ] |
| Post subject: | |
This is my first try with a sledge hammer and its not a very good pix. the other side was done a little bit better. I don't have the finder liner on it.  it is on the left bottom of the finder. someone will have a better pix, I have seen theme here .
|
|
| Author: | ATXKJ [ Sun May 06, 2007 7:12 pm ] |
| Post subject: | |
A couple of earlier threads http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=15710&highlight=pinch+weld http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=7690&postdays=0&postorder=asc&highlight=pinch+weld&start=0 |
|
| Author: | KJScott [ Thu May 10, 2007 11:11 pm ] |
| Post subject: | |
click on my car domain link in my signature |
|
| Author: | CD [ Sun May 13, 2007 8:17 am ] |
| Post subject: | |
http://www.ausjeepoffroad.com/forum/sho ... hp?t=67439 That's how I did mine. |
|
| Author: | jcphoto20 [ Mon May 14, 2007 1:05 am ] |
| Post subject: | |
ran 245/75 16s on unlifted for over 40k, never came close to pinch weld. |
|
| Author: | tjkj2002 [ Mon May 14, 2007 8:15 am ] |
| Post subject: | |
I aslo ran 245/75's for a couple of months with out a lift on my '02 without any pinchweld contact,I do have a pre-lowered KJ though. |
|
| Author: | Tokyojoe [ Mon May 14, 2007 3:30 pm ] |
| Post subject: | |
Type lift, pre or not lowered, type of tire, amount of backspacing/type of wheel, amount of peanut butter used, and any weight added to front can alter the amount or lack of rubbing to the pinch weld. |
|
| Author: | Se7enLC [ Tue May 15, 2007 12:06 pm ] |
| Post subject: | |
photos of my pinch weld (wow, that sounds dirty) http://photos.djali.is-a-geek.org:8000/Jeep/Tires/ |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|