Anyone know the best way to run the wires (2 setsof PIAA 580's) from a roof baket ? I asked a local shop and they told me they would have to drop the headliner and that it's a big job. Any help would be great !

_________________
Stand Out !!!

Tried to find the post but its not that big of a job, do not have to take down the headliner. You can run the wires down towards the windshield under the black strip, or there are a couple of other ways. I or someone will help find the post for you, but as i said you dont have to take down the headliner

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Rabbit,
Check the Electronics section. There is two or three threads on how to do it all. Also look in the How To Sections here on LOST and at KJ Country.com. Just did mine so if you cant find any answers shoot me a pm. Would tell ya now, but have to get working.

mike

oh naw you dont have to drop the headliner, so dont fret about that.

Here is one you might find helpful.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=15005

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877