BUMPERS THREAD - PLEASE READ BEFORE POSTING

03CDKJ · **Posted:** Sat Feb 28, 2009 12:19 am

Before Line-X

After Line-X

After Install

30 LED Lights For Bumper Logo...

tommudd · **Posted:** Sun Mar 08, 2009 5:49 pm

ARB - VS - SC bumper

Comparison side view

Please note cdiekhans SC bumper was on but flares/ inner fenders not fully trimmed out in this picture

Inc · **Posted:** Sun Mar 15, 2009 9:32 pm

Inc's Custom Rear Bumper with Swing Away Tire Carrier and Hi Lift:

rescu2000 · **Posted:** Thu Apr 09, 2009 12:13 pm

I will preference this with the following disclaimer: Yeah I know the back bumper is blocky and ugly. I was in a hurry and just wanted it functional. I still have to weld the d-ring mounts and I'll put them in a raised boss so that it breaks the flat look up some. The license plate is lit up by a neon frame that has been painted except for a stip around the light. That way it doesn't look gaudy and just lights up the plate. It still isn't legal (not bright enough) but it may keep me from getting pulled over until I get a brighter light somewhere.

The front bumper is going to get a hawse fairlead and synthetic line later this year.

Also, The color is not the final color. I plan on painting it the same color as the rock rails. It is a dark grayish.

scout · **Posted:** Sun Jun 21, 2009 11:35 pm

daspes · **Posted:** Sun Jun 28, 2009 10:28 pm

Still have to clean up a few things. Warn Rock Crawler Front Winch Bumper from a JK. But here's the first shots...

ohv_kj · **Posted:** Mon Oct 19, 2009 2:33 pm

I really like the color.Black Hammered, It off sets the black of the jeep. can't wait to make the stinger and flairs

Side View

How far it sticks out

Rock Lizard · **Posted:** Wed Nov 18, 2009 9:28 pm

The Rock Monitor Phase 1. Still working on the last details for the 02-04 signal pods, but that is it for the 05-07. Phase one is designed so one can add the convertible winch (Phase 4) and grill guard upgrades at anytime. Phase 4 can be added or removed within a matter of minutes. I will get pictures of the Phase 4 probably tomorrow night, need to have fairlead plate formed first. Phase 3 on my site is essentially just Phase 4 permanently welded onto the bumper. Phase 2 and 3 will not be an option until 2010. Just for Christmas, Phase 1 and 4 bumpers will be available. The pictures are of the prototype, so the shackle tabs are a little different on the production model. Oh, almost forgot, the bumper finished and sitting on those jackstands weights 45lbs.

Rock Lizard · **Posted:** Mon Dec 21, 2009 3:44 pm

Rock Monitor Phase IV convertible winch bumper for 02-04 KJ. Phase I is simply unbolt the winch parts and remove them. 05-07 models just picture without the signal light pods. (note: the washer fluid reservoir hasn't been relocated yet in the pictures)

redrubi1 · **Posted:** Sat Feb 20, 2010 12:11 pm

A few people i jeep with have a bumper from these people. They seem to be satisfied and their prices are much better than anything i have seen.

http://www.kenmtnac.com/KJ1stgen.html

tommudd · **Posted:** Sat Feb 20, 2010 12:22 pm

That place has posted or someone posted pictures before
WAY too big of a front bumper, would be worse than a stock as far as going off road.
Rear is way to square looking for my tastes doesn't flow well with the rear of the KJ

Pippobug · **Posted:** Mon Jun 21, 2010 5:12 pm

Endurance wrote:

Hi does anyone know where you can get this bumper ? Is it available over here in Europe, ie Germany?

Thank,
Fil.

daspes · **Posted:** Mon Jun 21, 2010 5:18 pm

Pippobug wrote:

Hi does anyone know where you can get this bumper ? Is it available over here in Europe, ie Germany?

Thank,
Fil.

Thats a TJM bumper (Australian company).

http://www.tjm.com.au/Default.aspx?tabid=36

Closest Distributer to Germany that I see on their site is going to be Austria, Switzerland, Italy, or France (depending on your location).

Pippobug · **Posted:** Mon Jun 21, 2010 5:27 pm

daspes wrote:

Pippobug wrote:

Hi does anyone know where you can get this bumper ? Is it available over here in Europe, ie Germany?

Thank,
Fil.

Thats a TJM bumper (Australian company).

http://www.tjm.com.au/Default.aspx?tabid=36

Closest Distributer to Germany that I see on their site is going to be Austria, Switzerland, Italy, or France (depending on your location).

Hi,
I am in the UK, so France is closes, but I guess ata push (being half Italian) I can get is shipped back from Italy.
I will have a look.

Fil.

daspes · **Posted:** Mon Jun 21, 2010 5:30 pm

Pippobug wrote:

daspes wrote:

Pippobug wrote:

Hi does anyone know where you can get this bumper ? Is it available over here in Europe, ie Germany?

Thank,
Fil.

Thats a TJM bumper (Australian company).

http://www.tjm.com.au/Default.aspx?tabid=36

Closest Distributer to Germany that I see on their site is going to be Austria, Switzerland, Italy, or France (depending on your location).

Hi,
I am in the UK, so France is closes, but I guess ata push (being half Italian) I can get is shipped back from Italy.
I will have a look.

Fil.

I was going off of Germany since that is where you referenced in your post, sorry I assumed. There is a UK distributer so you are in luck.

UNITED KINGDOM

OEC International
Broadway Road
Kingsteignton Newton Abbot, Devon TQ12 3PJ

P: +44 (0) 1626 356555
F: +44 (0) 1626 356066

huntbuggy · **Joined:** Sun Dec 19, 2010 6:24 pm **Posts:** 91

REAR bumper bump.

So if I read this correctly after sticky and searches, the only rear bumpers (without custom/fabbing) still made for the KJ are the:

1) Komodos from Rock Lizard

http://www.rocklizardfabrications.com/L ... bumper.htm

2) Tactical Armor Group 1st gens

http://www.kenmtnac.com/KJ1stgen.html

Any others?

roccet · **Posted:** Sun Apr 10, 2011 1:47 pm

I want this bumper.. !!!!!!!!! i was looking to make one myself because i just dont like my options but this is better than the one i wanted to design....
How do i get this?

[quote="03CDKJ"]Before Line-X

After Line-X

After Install

I also want to find out how the heck to these bumpers even attach?? i have had my bumper skin off several times.. and just dont see it.

riptricket · **Posted:** Sun Apr 10, 2011 2:13 pm

SC is no longer a company IIRC.
Bumpers attach via tow hook M-bolt location and usually by a third hole drilled on both sides behind where tow hooks are mounted.

daspes · **Posted:** Sun Apr 10, 2011 2:19 pm

Do a search for "suncoast custom". You seriously may want to rethink your decision. IIRC there are still people waiting to get there's.

03CDKJ · **Posted:** Sun Apr 10, 2011 10:02 pm

it's Sundance Customs..... :wink:

You can have mine Lights and all for $2500 :google:

BUMPERS THREAD - PLEASE READ BEFORE POSTING

Who is online