| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New Greasable U-joints http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=22555 |
Page 1 of 1 |
| Author: | Wasatch15 [ Sun Jul 15, 2007 6:57 pm ] |
| Post subject: | New Greasable U-joints |
Anybody have information where I can purchase good greasable u-joints for my driveshaft? Vendor, part numbers, cost, etc? Thanks, Ron |
|
| Author: | JJsTJ [ Sun Jul 15, 2007 7:03 pm ] |
| Post subject: | |
http://www.ok4wd.com/index.php/catalog/ ... f_u_joint/ http://www.4xshaft.com/index.html |
|
| Author: | Troysterr [ Mon Jul 16, 2007 12:09 am ] |
| Post subject: | |
I wrote this up a while back: http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=5130 I don't know if the links/prices are still good, but it may provide a good starting point. |
|
| Author: | JJsTJ [ Mon Jul 16, 2007 7:38 am ] |
| Post subject: | |
FWIW, I have the Woods greasables in the SYE/Woods shaft combo in my wifes KJ and they are great for ease of servicing. |
|
| Author: | Wasatch15 [ Tue Jul 17, 2007 1:59 pm ] |
| Post subject: | |
Do you have a part number on the woods u-joints? Are they booth the same? Thanks, Ron |
|
| Author: | JJsTJ [ Tue Jul 17, 2007 2:17 pm ] |
| Post subject: | |
Wasatch15 wrote: Do you have a part number on the woods u-joints? Are they booth the same?
Thanks, Ron I don't but I bet if you called them up and told them what you have they could probably figure it out. |
|
| Author: | N / A [ Fri Jul 20, 2007 3:39 pm ] |
| Post subject: | |
FYI : I hate my greasable ones, my lift makes it so the u joint is tweaked enough I can't get my grease gun on the zerk so O need to drop the driveshaft to grease it |
|
| Author: | Jeepjeepster [ Fri Jul 20, 2007 10:23 pm ] |
| Post subject: | |
Thats odd N/A. My rear driveshaft is almost straight with the OME HD springs. It doesnt take that long to get those four bolts out though.. |
|
| Author: | tommudd [ Fri Jul 20, 2007 11:28 pm ] |
| Post subject: | |
I just jack mine up and put up on jack stands and turn the driveshaft around until it (grease gun) goes on , grease them every 3000 and no problems tom |
|
| Author: | N / A [ Sat Jul 21, 2007 6:43 pm ] |
| Post subject: | |
I can get it on a little, but not far enough to lock on...PITA is all....I still drop it and grease it |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|