LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
TOOLS NEEDED TO INSTALL RUSTYS SPACER LIFT http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23118	Page 1 of 1

---

Author:	o4liberty [ Sun Aug 05, 2007 3:46 pm ]
Post subject:	TOOLS NEEDED TO INSTALL RUSTYS SPACER LIFT
CAN ANYONE TELL ME WHAT TOOLS ARE NEEDED TO INSTALL A RUSTYS SPACER LIFT?

---

Author:	BeepBeepJeepJeep [ Mon Aug 06, 2007 12:11 pm ]
Post subject:
A decent socket wrench set and a jack?

---

Author:	tjkj2002 [ Mon Aug 06, 2007 12:26 pm ]
Post subject:
Assorted metric wrenches and sockets(12,15,18,and 21mm mostly used),spring compressors,floor jack,jack stands,ratchet straps(to realign the clevis),2-3lbs hammer(to tap the upper knuckle to release the UBJ),and a torque wrench. Should only take about 3-5 hours to do.

---

Author:	tommudd [ Mon Aug 06, 2007 12:36 pm ]
Post subject:
You wont need the spring compressor to install that lift, should be pretty easy

---

Author:	Sport [ Mon Aug 06, 2007 3:51 pm ]
Post subject:
Get a big stupid drill bit to bore out those holes for the spacer that mount on top the strut assembly. mine didn't fit and I had to spend alot of time resizing them.

---

Author:	06BlueLimited [ Mon Aug 06, 2007 4:48 pm ]
Post subject:
got lazy and took it to the shop. I got a heck of a deal and they put it on for 100 bucks.

---

Author:	struggle07 [ Mon Aug 06, 2007 9:29 pm ]
Post subject:
for those that have used this kit, how thick is the OTT spacer? and is it just one spacer per side in the front?

---

Author:	tommudd [ Mon Aug 06, 2007 11:00 pm ]
Post subject:
just what you see in the picture one per side, takes longer to get the airbox and battery out than to install them.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/