LOST JEEPS :: View topic - Has anyone heard any word on new lift SFA or otherwise ????

I'm waiting for the kit to be completed too. I'm also waiting to win the lottery.
_________________
Amen!

I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22.

I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14

I will get the rear springs, shocks and Y link adapter for the rear end on my site next week.

All good things take time.

JeepinbyAl wrote:

Marlin,
You may want to take another photo of that strut assembly, this time with the spring isolators in place. I see that they are included in the package list, but when I see the photo, it looks like something was forgotten.

KJpilot wrote:

JeepinbyAl wrote:

I am curious if the strut assembly has been installed on a regular Liberty not just Al's old modified one. I don't see how it will work.

How will you need to modify the front CV? Is this as simple as using the CVs that you have for sale that are heavier design that I know you have mentioned didn't bind with your previous set ups. I am just wondering? I see that upper A arms is recommended for this anything different needed for lower A arms ball joint ect.

JeepinbyAl wrote:

Only 4",thought it was supposed to be 6"? Heck I'm almost at 4" with my SkyJacker lift and zero mods to the CV's where required.What are you guy's doing about the alloy front diff?

Author:	Jeephead1977 [ Fri Aug 10, 2007 12:49 pm ]
Post subject:	Has anyone heard any word on new lift SFA or otherwise ????
I know there was a lot of talk about different lift design possiblities and I was just wondering if anyone has heard any word on if any of these have come to life or a progress report maybe.

Author:	JJsTJ [ Fri Aug 10, 2007 2:28 pm ]
Post subject:
Best to look around in here>> SFA KJ SECTION

Author:	Joe Jeeper [ Fri Aug 10, 2007 9:30 pm ]
Post subject:	Lift
Jeepin by Al has the front portion of the 6" lift completed is finishing up on the rear 1/2 had to get specs for springs to be made among other things. I'm one of the 8 or 10 people waiting for the kit to be completed. Joe

Author:	Guest [ Sat Aug 11, 2007 12:08 am ]
Post subject:
Man, I hope that set up works well, & is not unreasonably expensive! I can't wait!

Author:	spoonplugger1 [ Sat Aug 11, 2007 11:32 am ]
Post subject:
Either way you're going to need a pretty decent amount of cash.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Has anyone heard any word on new lift SFA or otherwise ???? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23301	Page 1 of 5

Author:	BeepBeepJeepJeep [ Sat Aug 11, 2007 11:37 am ]
Post subject:
I'm waiting for the kit to be completed too. I'm also waiting to win the lottery.

Author:	Joe Jeeper [ Sat Aug 11, 2007 7:48 pm ]
Post subject:	Lottery
Quote: I'm waiting for the kit to be completed too. I'm also waiting to win the lottery. _________________ Amen!

Author:	JeepinbyAl [ Sat Aug 11, 2007 9:04 pm ]
Post subject:	My progress on the 6 inch
I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22. I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14 I will get the rear springs, shocks and Y link adapter for the rear end on my site next week. All good things take time.

Author:	Tokyojoe [ Sun Aug 12, 2007 4:21 pm ]
Post subject:
When the KJ is paid off, there will be plenty of money for the lift and then some. No hurry to pay off 0% interest though.

Author:	Guest [ Mon Aug 13, 2007 1:49 pm ]
Post subject:	Re: My progress on the 6 inch
JeepinbyAl wrote: I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22. I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14 I will get the rear springs, shocks and Y link adapter for the rear end on my site next week. All good things take time. Marlin, You may want to take another photo of that strut assembly, this time with the spring isolators in place. I see that they are included in the package list, but when I see the photo, it looks like something was forgotten.

Author:	Jeephead1977 [ Thu Aug 16, 2007 4:12 pm ]
Post subject:
How will you need to modify the front CV? Is this as simple as using the CVs that you have for sale that are heavier design that I know you have mentioned didn't bind with your previous set ups. I am just wondering? I see that upper A arms is recommended for this anything different needed for lower A arms ball joint ect.

Author:	TDI4BY [ Thu Aug 16, 2007 9:07 pm ]
Post subject:	Re: My progress on the 6 inch
KJpilot wrote: JeepinbyAl wrote: I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22. I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14 I will get the rear springs, shocks and Y link adapter for the rear end on my site next week. All good things take time. Marlin, You may want to take another photo of that strut assembly, this time with the spring isolators in place. I see that they are included in the package list, but when I see the photo, it looks like something was forgotten. I am curious if the strut assembly has been installed on a regular Liberty not just Al's old modified one. I don't see how it will work.

Author:	JeepinbyAl [ Thu Aug 16, 2007 9:50 pm ]
Post subject:	Re: My progress on the 6 inch
TDI4BY wrote: KJpilot wrote: JeepinbyAl wrote: I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22. I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14 I will get the rear springs, shocks and Y link adapter for the rear end on my site next week. All good things take time. Marlin, You may want to take another photo of that strut assembly, this time with the spring isolators in place. I see that they are included in the package list, but when I see the photo, it looks like something was forgotten. I am curious if the strut assembly has been installed on a regular Liberty not just Al's old modified one. I don't see how it will work. I have Eibach springs with a custom strut and custom strut mounts, It will give a 4" lift on regular Libertys!

Author:	JeepinbyAl [ Thu Aug 16, 2007 9:55 pm ]
Post subject:
Jeephead1977 wrote: How will you need to modify the front CV? Is this as simple as using the CVs that you have for sale that are heavier design that I know you have mentioned didn't bind with your previous set ups. I am just wondering? I see that upper A arms is recommended for this anything different needed for lower A arms ball joint ect. With the 4" lift we had to cut 3/8" off the outer edge of the CV joints to give the axle clearance at full extension.

Author:	HyperKJ [ Fri Aug 17, 2007 12:34 am ]
Post subject:	6" inch. version available too
http://jeepinbyal.com/LiftKits.aspx will the front diff. have reinforcement?? for 33's/35's??

Author:	Sport [ Fri Aug 17, 2007 1:08 pm ]
Post subject:
33's should fit with a 4" lift on the KJ. I think superlift had bigger. The webiste states 4 and 6 will be available.

Page 1 of 5	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	JeepinbyAl [ Thu Aug 16, 2007 9:57 pm ]
Post subject:	Re: My progress on the 6 inch
KJpilot wrote: JeepinbyAl wrote: I have everything on the front finished and ready for production. I an working on making longer control arms for the rear axal. I want to have everything finished and ready for the Jeff Daniel's Jeep show Sept. 22. I have the 4" front struts for sale as of this weekend. http://jeepinbyal.com/detail.aspx?ID=14 I will get the rear springs, shocks and Y link adapter for the rear end on my site next week. All good things take time. Marlin, You may want to take another photo of that strut assembly, this time with the spring isolators in place. I see that they are included in the package list, but when I see the photo, it looks like something was forgotten. I will try to have a better picture up on Saturday.

Author:	renegadekj [ Thu Aug 16, 2007 10:26 pm ]
Post subject:
So is that price for the front end only or front and rear\|? Looks good, Nice to see someone is making something different Josh

Author:	tjkj2002 [ Thu Aug 16, 2007 11:57 pm ]
Post subject:
Only 4",thought it was supposed to be 6"? Heck I'm almost at 4" with my SkyJacker lift and zero mods to the CV's where required.What are you guy's doing about the alloy front diff?

Author:	BeepBeepJeepJeep [ Fri Aug 17, 2007 7:15 am ]
Post subject:
tjkj2002 wrote: Only 4",thought it was supposed to be 6"? Heck I'm almost at 4" with my SkyJacker lift and zero mods to the CV's where required.What are you guy's doing about the alloy front diff?