| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| will this work? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23824 |
Page 1 of 1 |
| Author: | bigmd [ Mon Aug 27, 2007 7:35 pm ] |
| Post subject: | will this work? |
i bought a used set of rustys 2.5 front springs.on there site they only sell the 2 inch springs separately.if i buy those and add one of their 3/4inch spacers,will that be ok? |
|
| Author: | raceinfan [ Mon Aug 27, 2007 7:40 pm ] |
| Post subject: | |
I don't think you can compress the spring that much to do it there's a topic around here ( or general section) that states this |
|
| Author: | Dje Ryu [ Mon Aug 27, 2007 8:40 pm ] |
| Post subject: | |
He's talking about adding the 3/4" spacers to just the rear with the 2" coils and using the 2.5" coils on the front without spacers. You might need to do a small clevis lift to equal it out but, it should be do-able, imo. |
|
| Author: | bigmd [ Tue Aug 28, 2007 8:52 am ] |
| Post subject: | |
will the OME NITROCHARGER rear shocks they sell work with those rear springs?also are those spacers made to work with the stock spring pads? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|