| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Moog Lower Ball Joint #K3199 Dust Boot http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=25271 |
Page 1 of 1 |
| Author: | ttarmoom [ Wed Oct 10, 2007 4:16 pm ] |
| Post subject: | Moog Lower Ball Joint #K3199 Dust Boot |
Hey, anyone know where I can find a dust boot for the Moog Lower Ball Joint Part #K3199? I've called everyone including federal-mogul, and am having a hard time. My current boot has a tear in it and I can't justify paying another $50+ just so I can use the boot. Any help would be appreciated. Thanks. Tarwhat Tarmoom Woodhaven, MI |
|
| Author: | tjkj2002 [ Wed Oct 10, 2007 4:18 pm ] |
| Post subject: | Re: Moog Lower Ball Joint #K3199 Dust Boot |
ttarmoom wrote: Hey, anyone know where I can find a dust boot for the Moog Lower Ball Joint Part #K3199? I've called everyone including federal-mogul, and am having a hard time. My current boot has a tear in it and I can't justify paying another $50+ just so I can use the boot. Any help would be appreciated. Thanks. Many have tried and there seems to be none available unless you get a new LBJ.
Tarwhat Tarmoom Woodhaven, MI |
|
| Author: | Jeepjeepster [ Wed Oct 10, 2007 4:42 pm ] |
| Post subject: | |
Al sold me some covers that go over the entire boot and all. Mine was torn also. It doesnt hold grease as well, but it keeps crap out of the joint. Just be sure to grease them at least every oil change and after offroading. |
|
| Author: | KJ04 [ Wed Oct 10, 2007 6:51 pm ] |
| Post subject: | |
What seems to be the cause of them tearing? |
|
| Author: | tjkj2002 [ Wed Oct 10, 2007 7:04 pm ] |
| Post subject: | |
KJ04 wrote: What seems to be the cause of them tearing? Most are torn from the install,not paying attention to the boot when installing,just put a little grease on the boots(outside) and they just slip through the knuckle.
|
|
| Author: | GilaMonster [ Wed Oct 10, 2007 7:21 pm ] |
| Post subject: | |
I had the same thing happen and could not get a boot. Some discount auto stores have generic ones that you can try. I just siliconed up the tear on both sides of the boot and have had luck so far (1500 miles). Mine tore because I wasn't paying attention on the cup sizes and with an air tool, things happen fast...darn. You could try taking one off the old ball joint if they are not torn. |
|
| Author: | ttarmoom [ Thu Oct 11, 2007 9:50 am ] |
| Post subject: | |
KJ04 wrote: What seems to be the cause of them tearing?
Me being stupid is what caused mine to tear. I tore my suspension apart to replace the CV halfshaft this past weekend and was careless when putting things back together. I like the idea of greasing the outside slightly when working around the area. I may have to buck up and pay the piper if I don't find one soon. Thanks for the repies, all! 
|
|
| Author: | Dje Ryu [ Thu Oct 11, 2007 2:37 pm ] |
| Post subject: | |
Just look at it like this: You'll have an extra ball joint if one ever wears out, just don't mess up any more boots. 
|
|
| Author: | ttarmoom [ Sat Oct 13, 2007 9:02 am ] |
| Post subject: | |
Ok, great news! As a last ditch effort, I thought I'd call JeepinByAl even though they didn't have any boots up on their website. I talked to them and they gave a search of the stock room and found the boots! They just added them to their online catalog, so anyone else that needs a set can order them. Thanks again for everyone's help and suggestions. Tarwhat Tarmoom |
|
| Author: | Jeepjeepster [ Sat Oct 13, 2007 7:12 pm ] |
| Post subject: | |
Are you sure its a boot and not just a cover? |
|
| Author: | ttarmoom [ Sat Oct 20, 2007 10:46 am ] |
| Post subject: | |
Jeepjeepster wrote: Are you sure its a boot and not just a cover?
Well, I'll find out when it get here. The description on the webpage says: "Replacement ball joint boots for Al’s Gen 1, 2 & 3 A-arms". http://jeepinbyal.com/detail.aspx?ID=471 |
|
| Author: | Jeepjeepster [ Sat Oct 20, 2007 12:04 pm ] |
| Post subject: | |
Yup, thats what I have. Its just a cover that slides over the entire boot. It works ok, but its not as good as a regular boot. 
This is the boot that had a hole in it. You can tell its not as plump as the other side. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|