| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| BDS 2 inch lift/what tire size?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=25834 |
Page 1 of 1 |
| Author: | rndallel [ Fri Oct 26, 2007 8:18 am ] |
| Post subject: | BDS 2 inch lift/what tire size?? |
I have the 2 inch BDS Lift....now looking for some tires.....I got the boss talked into buying Cooper Discoverer STT ( I work for a Natural Gas company where it's always muddy), will I have the clearance for the 235 85 R16? This Tire would be about 31.73 inches in dia. |
|
| Author: | Gris [ Fri Oct 26, 2007 8:56 am ] |
| Post subject: | |
I have run both 245/75 and 265/70 on my Libby with that BDS lift. I had minor rubbing at full lock or stuff until I pounded the pinch weld, then no rubbing at all. The 235/85s would be a full inch taller than either of those. I'd say with a pouned weld, you'd get minor rubbing, but that is all. I'm planning on making my next set of tires 235/85-16s. |
|
| Author: | rndallel [ Fri Oct 26, 2007 10:39 am ] |
| Post subject: | |
It seems as if I will have to go with the 245/75 R 16 to have less/to no rubbing. Right now the jeep has 235/70's on, and they just look tiny |
|
| Author: | Blue KJ in PA [ Fri Oct 26, 2007 12:37 pm ] |
| Post subject: | |
Gris wrote: I have run both 245/75 and 265/70 on my Libby with that BDS lift. I had minor rubbing at full lock or stuff until I pounded the pinch weld, then no rubbing at all.
The 235/85s would be a full inch taller than either of those. I'd say with a pouned weld, you'd get minor rubbing, but that is all. I'm planning on making my next set of tires 235/85-16s. How is the BDS lift working for you? I have that lift kit on my consideration list. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|