LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Cheapest place to buy front driveshaft assembly?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=25878		 Page 1 of 1
Author:  psinsyd [ Sat Oct 27, 2007 10:41 am ]
Post subject:  Cheapest place to buy front driveshaft assembly?
Hey everyone,

Well, I troubleshot the vibration/thunking in the front end to the front driveshaft assembly.

IIRC, the dealership wants something like $500 for it, and I thought I saw a site that had it for right around $400. Local shop wanted close to $400 just to replace the cv joints at each end with u-joints. I also plan on checking out rockforddriveline.com to see what they have to offer also.

Just curious what the best price everyone has found for the mopar front driveshaft assembly.

TIA!!!

8)
Author:  tjkj2002 [ Sat Oct 27, 2007 11:02 am ]
Post subject: 
worldpartsexpress.com has the front driveshaft for $358.80 plus S/H.
Author:  psinsyd [ Sat Oct 27, 2007 12:22 pm ]
Post subject: 
tjkj2002 wrote:
worldpartsexpress.com has the front driveshaft for $358.80 plus S/H.


Woohoo! Cheapest I found was @ $362. Every bit helps. Thanks!!!!

8)
Author:  corwyyn [ Sat Oct 27, 2007 1:10 pm ]
Post subject: 
Wow, I just did this on my KJ because one of the boots got torn and I got some liquid sandpaper in there (water, mud, sand - mix it together and let 'er rip :P ). Anyway, I checked online and the cheapest I found new was around $350 (like you've seen above), then I found one at a local recycler for $90 plus tax. Checked it against mine to make sure it was the correct type and made sure all the seals/boots were good, put it in the Jeep and it's doing fine.
Author:  psinsyd [ Sat Oct 27, 2007 7:08 pm ]
Post subject: 
corwyyn wrote:
Wow, I just did this on my KJ because one of the boots got torn and I got some liquid sandpaper in there (water, mud, sand - mix it together and let 'er rip :P ). Anyway, I checked online and the cheapest I found new was around $350 (like you've seen above), then I found one at a local recycler for $90 plus tax. Checked it against mine to make sure it was the correct type and made sure all the seals/boots were good, put it in the Jeep and it's doing fine.


Now THAT'S a steal!!!

8)
Author:  Rush345 [ Sun Oct 28, 2007 2:52 am ]
Post subject:  I doubt these are cheaper.
But these were on a thread here about a month ago. These are custom jobs , but it never hurts to look. Go To:

http://www.reeldriveline.com/

Good Luck on your search. 8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/