I would bet AllJs has a few laying around for cheap
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD Frankie Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=26256 |
Page 1 of 1 |
| Author: | dog_party [ Tue Nov 06, 2007 3:28 pm ] |
| Post subject: | CRD Frankie Question |
When I put on my Daystar spacer lift, I tossed the stock parts that the Daystar stuff replaced. I still, of course, have the OE strut plates, but when they refer to "Mopar Isolators," are they talking about the spacers that I tossed out? -- 2 Old Man Emu Front Struts - NS131 Struts -- 2 Old Man Emu Front H/D CRD-rated OME790 Coil Springs! -- [b]4 Mopar Isolators (poly parts)[b] *CORE CHARGE APPLIES -- 1 Right & 1 Left Mopar Upper Strut plate *CORE CHARGE APPLIES -- 2 OME948 Rear Heavy Duty Coil Springs -- 2 OME Long Travel Rear Shocks - OMENS132L -- One Pair Rear Bump Stops -- All Hardware Needed for assembly of front struts. -- Labor to assemble 2 front strut assemblies. If they are, I need to get new OE spacers...or else I'll have the Daystar 2"ers on top of the OME springs/struts. |
|
| Author: | DarbyWalters [ Tue Nov 06, 2007 5:30 pm ] |
| Post subject: | |
Yes, most likely the black rubber ones that were in the OEM strut |
|
| Author: | dog_party [ Wed Nov 07, 2007 12:19 pm ] |
| Post subject: | |
That's what I figured. Bummer. Oh well, more to buy. |
|
| Author: | DarbyWalters [ Wed Nov 07, 2007 12:44 pm ] |
| Post subject: | |
I would bet AllJs has a few laying around for cheap
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|