LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Part numbers i need
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=26299		 Page 1 of 1
Author:  _UnLiMiTeD_ [ Wed Nov 07, 2007 9:54 pm ]
Post subject:  Part numbers i need
Ok, so heres the deal, i work at an autoparts store locally (lordco) And i was wondering what the part numbers are for the OME HD coils for front and rear and the part numbers for the rancho shocks to go with them. Is there anything else i would need to do this or is that it? dont have lots of money but was thinkin of gathering the parts before i quit that place.
Author:  tommudd [ Wed Nov 07, 2007 10:48 pm ]
Post subject: 
I posted over on the other thread but
Rancho fronts RSX 17505
Rancho Rears RSX 17004
OME Heavy Duty fronts OME927
OME Medium Duty Fronts OME926
OME Medium Duty Rear OME947
OME Heavy Duty Rear OME948
think thats all correct, remembered the rears whilest grocery shopping :roll:
you can do just the springs and shocks with nothing else and will get you 2 to 2 1/4 inches of lift at least. maybe more if your springs are worn some

Tom
Author:  _UnLiMiTeD_ [ Thu Nov 08, 2007 2:14 am ]
Post subject: 
dont need those isolator pads or whatever people always mention? also if i just do those, will it be noticably higher in the back end compared to the front if i do just coils and shocks?
Author:  _UnLiMiTeD_ [ Thu Nov 08, 2007 4:39 pm ]
Post subject: 
when you guys buys them seperatly, do they ever sell them in sets? its like $100 for each strut up front here.
Author:  tommudd [ Thu Nov 08, 2007 4:51 pm ]
Post subject: 
I got my Rancho struts for 80 each from AllJs but their price may of went up. rears I got from Summit Racing for 50 each shipped, not sure what it would be shipping North! :wink:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/