WHERE'S THE PICTURES????????
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 4" - 6" lift kit KJ photos? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=27009 |
Page 1 of 2 |
| Author: | dieselenthusiast [ Wed Nov 28, 2007 11:32 pm ] |
| Post subject: | 4" - 6" lift kit KJ photos? |
Do we have any pictures of Al’s 4 - 6 inch lift? |
|
| Author: | Leep Jiberty [ Thu Nov 29, 2007 12:38 am ] |
| Post subject: | |
joe jeeper has the 4 inch kit...i have talked to him and everthing works well even w/ that cut...i will e getting the 6'' soon maybe spring...i'll have pics unless someone beats me to it |
|
| Author: | Guest [ Thu Nov 29, 2007 12:16 pm ] |
| Post subject: | |
WHERE'S THE PICTURES????????
|
|
| Author: | FastTRX [ Thu Nov 29, 2007 1:26 pm ] |
| Post subject: | |
Got these of Al's website...(been posted before in the past) 
Not quite sure if this guy is a member here but this is one badarse KJ!! 
One of Joe's. Lookin' real good! Guna be a hard decision between SFA and this lift...there's potiential both ways it seems (I'm sure some beg to differ..). Just how you want to go about it and spend your $. |
|
| Author: | C co Crusader 2/127 [ Thu Nov 29, 2007 2:39 pm ] |
| Post subject: | |
personally i like getting a bit of gas milage. An for at least the next few years the lib is the daily driver. So for now ill go with the 4 or 6 in lift. After i get a new car its game on!!
|
|
| Author: | csukoh78 [ Thu Nov 29, 2007 6:45 pm ] |
| Post subject: | |
I love that hood.....I wish there was a ram air intake that had a water prevent |
|
| Author: | tommudd [ Thu Nov 29, 2007 7:18 pm ] |
| Post subject: | |
thats just a I think 69 or so Mustang scoop on the hood that Jeepin Al put on |
|
| Author: | Guest [ Thu Nov 29, 2007 7:39 pm ] |
| Post subject: | |
I think that is Marlins 6" lift... I might be wrong though. |
|
| Author: | chefdab [ Thu Nov 29, 2007 9:16 pm ] |
| Post subject: | |
The dark blue KJ is JeepinAl's original KJ with his custom 5.5 inch lift. I don't know if Marlin swapped it out for the new 6" kit or not. Yes that is a Mustang hood scoop. It IS functional. He cut a hole in the hood and ran a duct over to the air box. |
|
| Author: | dieselenthusiast [ Thu Nov 29, 2007 11:52 pm ] |
| Post subject: | |
Thanks for the photos! What’s the price between the two lifts and what components come with each? |
|
| Author: | Guest [ Thu Nov 29, 2007 11:56 pm ] |
| Post subject: | |
dieselenthusiast wrote: Thanks for the photos! What’s the price between the two lifts and what components come with each?
The answer to your questions are with in these links: http://www.jeepinbyal.com/4inSTDliftkit37L.aspx http://www.jeepinbyal.com/6inSTDliftkit37L.aspx |
|
| Author: | M&P40 [ Fri Nov 30, 2007 12:23 am ] |
| Post subject: | |
and i thought the frankenlift was expensive 
|
|
| Author: | dieselenthusiast [ Fri Nov 30, 2007 1:00 am ] |
| Post subject: | |
KJpilot wrote: dieselenthusiast wrote: Thanks for the photos! What’s the price between the two lifts and what components come with each? The answer to your questions are with in these links: http://www.jeepinbyal.com/4inSTDliftkit37L.aspx http://www.jeepinbyal.com/6inSTDliftkit37L.aspx Thank you KJpilot for the links. I didn’t realize that he had his website up and available for access. This is really exciting news. I’ve heard so many good things about Al and his products. I think the 4” would be in my best interest. I’m assuming that the 4” will allow for 33 inch tires???? |
|
| Author: | Joe Jeeper [ Fri Nov 30, 2007 10:54 pm ] |
| Post subject: | 33" tires |
You could put 33" tires on but if you off road hard the'll be rubbing all over, I have 32" that just make it wheelin'. Joe (I also haven't had to cut my bumper up in the front or remove my wheel liners, or move my washer bottle either) |
|
| Author: | dieselenthusiast [ Sat Dec 01, 2007 1:45 am ] |
| Post subject: | Re: 33" tires |
Joe Jeeper wrote: You could put 33" tires on but if you off road hard the'll be rubbing all over, I have 32" that just make it wheelin'. Joe (I also haven't had to cut my bumper up in the front or remove my wheel liners, or move my washer bottle either)
Thanks for the clarification! Looks like Marty might be installing one for me this summer! Joe, what SIZE of tires have you found that work best with the 4” setup? I will not be doing any serious off-roading, I just need the extra clearance. I also want to stay with 17 inch wheels.
|
|
| Author: | Joe Jeeper [ Sat Dec 01, 2007 4:03 pm ] |
| Post subject: | tires |
Not sure with 17" wheels, I have 16" and have LT235/85R16 MTR's. Joe |
|
| Author: | Guest [ Wed Dec 05, 2007 5:55 pm ] |
| Post subject: | |
M&P40 wrote: and i thought the frankenlift was expensive
Yeah, but look at what is all included in the kits, especially the 6" kit. New driveshaft, 4.10 gears, everything you need. |
|
| Author: | DarbyWalters [ Wed Dec 05, 2007 6:16 pm ] |
| Post subject: | |
I want to know where he got the Cowl Deflector by the windshield wipers?
|
|
| Author: | jsc7002 [ Wed Dec 05, 2007 7:24 pm ] |
| Post subject: | |
here ya go darby, http://www.autotoys.com/x/product.php?productid=2233 http://www.strippermotorsports.com/lushwicosmje.html here are a couple more pics of the 4" lift 
|
|
| Author: | RAYMAN975 [ Wed Dec 05, 2007 7:45 pm ] |
| Post subject: | |
that burgundy jeep is so sexy haha |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|