LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

I have the Rusty's lift. Which springs do I have?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=27086		 Page 1 of 1
Author:  mapco [ Sat Dec 01, 2007 12:57 pm ]
Post subject:  I have the Rusty's lift. Which springs do I have?
So I've been reading that the ARB Bull Bar needs HD springs. I'm kind of doubting that the lift came with HD springs, but can anyone tell me?
Author:  tommudd [ Sat Dec 01, 2007 1:11 pm ]
Post subject: 
You bought a full Rustys spring lift? If so you have just a set of Rustys springs which are only rated at 310 lb, Go with OME Heavy Duty 400 lb and you will be good for whatever. They are great! This is the reason so many say do it right the first time , not preaching just saying.
Author:  Jeepjeepster [ Sat Dec 01, 2007 1:29 pm ]
Post subject: 
Yea, you need the OME HD coils if you are going to get an ARB bumper.

Rustys springs are rustys springs.. Nothing special about them.
Author:  csukoh78 [ Sat Dec 01, 2007 1:47 pm ]
Post subject:  Re: I have the Rusty's lift. Which springs do I have?
emsox wrote:
So I've been reading that the ARB Bull Bar needs HD springs. I'm kind of doubting that the lift came with HD springs, but can anyone tell me?


Im right there with ya.....going to upgrade to OME HD springs.

Question is, which size do we get?
Author:  Jeepjeepster [ Sat Dec 01, 2007 2:14 pm ]
Post subject:  Re: I have the Rusty's lift. Which springs do I have?
csukoh78 wrote:
emsox wrote:
So I've been reading that the ARB Bull Bar needs HD springs. I'm kind of doubting that the lift came with HD springs, but can anyone tell me?


Im right there with ya.....going to upgrade to Rusty's springs.

Question is, which size do we get?


Going to upgrade to Rustys springs? Your sig says you already have them.. :?

Its best to get OME HD springs if you have the ARB bumper.
Author:  csukoh78 [ Sat Dec 01, 2007 2:23 pm ]
Post subject: 
Yes, typo, OME HD springs. What size?
Author:  Jeepjeepster [ Sat Dec 01, 2007 5:03 pm ]
Post subject: 
csukoh78 wrote:
Yes, typo, OME HD springs. What size?


They only make one size for the liberty.

:)
Author:  tommudd [ Sat Dec 01, 2007 10:25 pm ]
Post subject: 
they make 3 for the front
stock..... basically OME 925
medium duty OME 926 375 lbs
heavy duty OME 927 400 lbs

rear
Medium OME 947
Heavy 948
Author:  csukoh78 [ Sun Dec 02, 2007 10:38 am ]
Post subject: 
is the length going to be correct, though? I don't want to lose lift because the HD springs are shorter than the ones with the Rusty's lift.
Author:  Jeepjeepster [ Sun Dec 02, 2007 2:04 pm ]
Post subject: 
csukoh78 wrote:
is the length going to be correct, though? I don't want to lose lift because the HD springs are shorter than the ones with the Rusty's lift.


Yea, they only make one length of the OME HD spring for the liberty.

Tommudd says he has the same amount of lift with his OME HD set-up as a rig with the rustys lift.

Ive had both the OME Medium duty springs and the Rustys front springs and I got 1" more lift with the Rustys springs. I guess the HD springs lift it 1" more than the Medium springs. :?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/