LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rustys height
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=27276		 Page 1 of 1
Author:  wildrussian [ Thu Dec 06, 2007 4:57 pm ]
Post subject:  Rustys height
Im thinking about the future and sagging springs so I have some questions and that would be great if someone chimes in

I have Rustys in the front and 2 ring clevis and i have 2 3/4" lift higher than factory (after 8000 miles), is that good heights with lift and clevis together?

Another question, Will I be able to get the same lift with OME HDs and 3 ring clevis?
Author:  tommudd [ Thu Dec 06, 2007 5:52 pm ]
Post subject: 
Yes thats a good heighth I would say and although some will argue till the cows come home, yes with heavy Duty OMEs you will be right in that same area or should be. I know am with the ARB hanging out there
Author:  wildrussian [ Thu Dec 06, 2007 8:13 pm ]
Post subject: 
I have an opportunity to get some OME HDs, is it worth it to swap them out with my rustys?
Author:  wildrussian [ Thu Dec 06, 2007 9:51 pm ]
Post subject: 
Come on guys let me know something
Author:  Tokyojoe [ Thu Dec 06, 2007 9:56 pm ]
Post subject: 
My Rusty's lift was installed in January 05. My height is still great (no steel front bumper). No Clevis.

Soon the Rusty's lift will be for sale (getting the 4" lift).
Author:  tommudd [ Thu Dec 06, 2007 10:18 pm ]
Post subject: 
depends if you are getting a bumper or not, how you like your present ride, how long you are keeping the Liberty etc. or if you dont want them where are they I may need to for the attic :wink:
Author:  wildrussian [ Fri Dec 07, 2007 10:48 am ]
Post subject: 
tommudd wrote:
depends if you are getting a bumper or not, how you like your present ride, how long you are keeping the Liberty etc. or if you dont want them where are they I may need to for the attic :wink:


I might eventually get rock lizard new bumper and Im keeping it forever :D Well my brother said he would get me something for christmas so I thought best springs would be a great investement. Like I mentioned my only concern is the height, if I can get as high with OME as i am with rustys?
Author:  tommudd [ Fri Dec 07, 2007 11:06 am ]
Post subject: 
Not sure on the Medium springs if you can get the same heighth, but the heavy dutys you can, plus if you are going aftermarket bumper later then you will need the HDs later anyways. So why not now right??
Author:  wildrussian [ Fri Dec 07, 2007 11:17 am ]
Post subject: 
tommudd wrote:
Not sure on the Medium springs if you can get the same heighth, but the heavy dutys you can, plus if you are going aftermarket bumper later then you will need the HDs later anyways. So why not now right??


Thats all I was worried about and I am getting HDs so I should be good then. Where is the best place to get them at?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/