It is currently Wed Dec 17, 2025 1:04 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: help me build a lift.
PostPosted: Sat Dec 08, 2007 12:52 am 
Offline
LOST Newbie

Joined: Thu Nov 29, 2007 10:49 am
Posts: 49
i want a full suspention lift can some one help me build one? i want some OME parts and im not to shur what else. i would like to get 2.5 inch for now ( going to so atleast 5 by this time next year) im going to get a front and rear bumper but im going to buy then one at a time along with rocker plates and under armer, and im going to put it all on at one time, so im going to need H/D but i cant put H/D on untill i have 100 extra pounds on my jeep from what i have read or can i put H/D on stock jeep? but i can just get med. now and upgrade later if so.

_________________
i have a 2004 jeep liberty, i am trying to get it to be the biggest and best around.

aftermarket rims
home made roof light bar
front grill lights
235/75/16 AT
COLD AIR INTAKE


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 1:02 am 
Offline
LOST Addict

Joined: Sat Jul 09, 2005 1:46 pm
Posts: 1195
Just get a Frankenlift II Premium and Al's uppper arms and you're good to go.

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 1:08 am 
Offline
LOST Newbie

Joined: Thu Nov 29, 2007 10:49 am
Posts: 49
that will be over $1200 i was hoping to buy the sparite parts for about half lol

_________________
i have a 2004 jeep liberty, i am trying to get it to be the biggest and best around.

aftermarket rims
home made roof light bar
front grill lights
235/75/16 AT
COLD AIR INTAKE


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 1:11 am 
Offline
LOST Newbie

Joined: Thu Nov 29, 2007 10:49 am
Posts: 49
could i buy rustys kift and got OME H/D later for it

_________________
i have a 2004 jeep liberty, i am trying to get it to be the biggest and best around.

aftermarket rims
home made roof light bar
front grill lights
235/75/16 AT
COLD AIR INTAKE


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 1:32 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
lots of confusing stuff
First why buy Rustys and then change them out in a short amount of time
Second who was the idiot that said you had to have 100 lbs on the front before you could run OME Heavy Dutys

First OME Heavy Duty if you are going bumpers etc.
Second you can install the heavy Dutys today if you want and run them until you get the rest. It "MAYBE " an
little stiff but I have ran them and so have others without that extra 100 lbs on the front :? :? very confused on that statement yet
Third you can piece it together sure no problems, for example my springs and front struts came from AllJs, my rear shocks from Summit Racing, conduit nuts from Lowes :wink: etc

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 2:00 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Why not just get the rustys lift? Its a good all around lift minus the rear shocks. :)

It will ride good too. 8)

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 2:09 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
but why pay 500 for the rustys only to replace it when he gets front and rear bumpers?? itd be completely pointless

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 2:10 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Jeepjeepster wrote:
Why not just get the rustys lift? Its a good all around lift minus the rear shocks. :)

It will ride good too. 8)


because he said he wanted to add bumpers etc front and rear thats why he should go OME HDs not the Rustys, :roll:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 2:21 am 
Offline
LOST Newbie

Joined: Thu Nov 29, 2007 10:49 am
Posts: 49
i think i will just make a home made one i dont have alot to spend so i can buy over the winter and come late feb put it on...

_________________
i have a 2004 jeep liberty, i am trying to get it to be the biggest and best around.

aftermarket rims
home made roof light bar
front grill lights
235/75/16 AT
COLD AIR INTAKE


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 08, 2007 9:47 am 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 2:11 pm
Posts: 1885
Location: Grand Rapids, MI
My advice..look in the "for sale" section and eBay. I bought all the parts for my lift on here, JeepKJ country, and eBay.

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com