| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| TRUE new CRD OME790 spring length? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=27578 |
Page 1 of 1 |
| Author: | cherokj [ Sun Dec 16, 2007 7:39 am ] |
| Post subject: | TRUE new CRD OME790 spring length? |
Anyone has measured them before installing? Thanks |
|
| Author: | cherokj [ Mon Dec 17, 2007 9:41 am ] |
| Post subject: | |
Nobody in the forum knows that measurement? I know 927's are 394mm at 400lbs, 926's are 392mm at 375lbs, 925's are 385mm at 375lbs, but don't know how long the 790 are. |
|
| Author: | KJ04 [ Mon Dec 17, 2007 10:13 am ] |
| Post subject: | |
Try here info@boulderbars.com |
|
| Author: | cherokj [ Mon Dec 17, 2007 1:19 pm ] |
| Post subject: | |
I'll try. Cheers |
|
| Author: | wildrussian [ Mon Dec 17, 2007 1:30 pm ] |
| Post subject: | |
Just recently I read a post about the measurements of the springs and it said that you shouldn't go by the measurements to figure out how much lift you will get. You might need the measurements for something else but i thought I would let you know anyways. |
|
| Author: | cherokj [ Mon Dec 17, 2007 1:48 pm ] |
| Post subject: | |
Right. But the length of spring AND the extended max length of shock are important to know how much the front suspension drops. More in our KJs with the upper ball joint issue. |
|
| Author: | foosed [ Mon Dec 17, 2007 4:25 pm ] |
| Post subject: | |
I just happen to have a set at home waiting to be installed. I will measure them tonight and let you know what I find out. |
|
| Author: | cherokj [ Tue Dec 18, 2007 5:42 am ] |
| Post subject: | |
Thanks a lot pal |
|
| Author: | foosed [ Tue Dec 18, 2007 1:12 pm ] |
| Post subject: | |
I got sidetracked last night and didn't get it done. Will try again tonight. |
|
| Author: | foosed [ Thu Dec 27, 2007 1:22 am ] |
| Post subject: | |
Uncompressed length for the 790's are 372mm or just over 14.5". |
|
| Author: | cherokj [ Thu Dec 27, 2007 9:42 am ] |
| Post subject: | |
 Wow, that's a lot less than the 927's ( 394mm according to ARBSeth data ).
It makes a lot of sense if you want that spring ( 790 ) works with the NS-131s, which are only 11mm longer extended than the stock front shocks. What I don't understand now is how can work a 927 paired with a ns-131. That shock wouldn't last long if the ARB data is correct. Just my opinion Thanks again, foosed |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|