ya I understand, but you cant go wrong with OME, man its late I figured Id be the only person on the forum at 1 in the morning lol just cant get off its too addicting
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear Heavy duty springs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=28669 |
Page 1 of 1 |
| Author: | JHCRASH [ Fri Jan 18, 2008 2:38 am ] |
| Post subject: | Rear Heavy duty springs |
Who makes the tallest rear Heavy duty CRD springs. I have the RRO rockfather 1 and the rear spacers just arent cutting it with the front so stiff and the rear not it is bouncy. The front springs are OME crd heavy duty. I want the tallest in the rear and then I will adjust the front acordingly. Thanks guys you all rock. |
|
| Author: | jsc7002 [ Fri Jan 18, 2008 2:42 am ] |
| Post subject: | |
OME HD or you can get some custom made http://www.coilsprings.com/custom/quote.html and then you can get the length you want and the rating you want, plus they arent too expensive |
|
| Author: | JHCRASH [ Fri Jan 18, 2008 2:45 am ] |
| Post subject: | |
jsc7002 wrote: OME HD or you can get some custom made
http://www.coilsprings.com/custom/quote.html and then you can get the length you want and the rating you want, plus they arent too expensive I would probably just go with the OME HD's I just wanted to make sure. RRO says theirs are custom made but not many people using their stuff so I would prefer a tried a trued source. |
|
| Author: | jsc7002 [ Fri Jan 18, 2008 2:50 am ] |
| Post subject: | |
ya I understand, but you cant go wrong with OME, man its late I figured Id be the only person on the forum at 1 in the morning lol just cant get off its too addicting
|
|
| Author: | JHCRASH [ Fri Jan 18, 2008 3:04 am ] |
| Post subject: | |
I work nights 6:00pm - 6:00 am 6 days a week so I check in through through the night when I can. |
|
| Author: | tommudd [ Fri Jan 18, 2008 3:07 am ] |
| Post subject: | |
Go with OMEs cant beat them and if you need extra you can always come up with a spacer for a little more, jsc....what do you mean NO ONE ON HERE, its only two A.M. here and I will be in the office at 6:30 !  I can sleep when I die for now .......snoring sounds 
|
|
| Author: | AZScout [ Fri Jan 18, 2008 3:42 am ] |
| Post subject: | |
Doesn't JeepinbyAl have rear 4" springs? |
|
| Author: | JHCRASH [ Fri Jan 18, 2008 11:23 am ] |
| Post subject: | |
AZScout wrote: Doesn't JeepinbyAl have rear 4" springs?
Ya but 4" wont work well with the front I have I just want to get the tallest without buying a whole new lift. so rear springs and isolaters and then a clevis to help the front. |
|
| Author: | KJ04 [ Fri Jan 18, 2008 1:45 pm ] |
| Post subject: | |
JHCRASH wrote: AZScout wrote: Doesn't JeepinbyAl have rear 4" springs? so rear springs and isolaters and then a clevis to help the front. How much are you sagging in the front? The OME front coils used by RRO on the CRD Rockfather I and II are the #927 400lb. rate, which differ from the new CRD #790 500 lb.rate that Al J's offers. |
|
| Author: | JHCRASH [ Fri Jan 18, 2008 7:29 pm ] |
| Post subject: | |
KJ04 wrote: JHCRASH wrote: AZScout wrote: Doesn't JeepinbyAl have rear 4" springs? so rear springs and isolaters and then a clevis to help the front. How much are you sagging in the front? The OME front coils used by RRO on the CRD Rockfather I and II are the #927 400lb. rate, which differ from the new CRD #790 500 lb.rate that Al J's offers. My front springs are the 790's,(I went and looked at the box) It has not sagged at all not even when I put my bumper on. RRO offers them as the HD with front bumper CRD springs.Which they are HD thats for sure. RRO told me the REAR ones they make are heavier and taller than the OME's so you dont have to add any extra isolater pads.I can get them for $99 since i bought my lift there but for anyone else they are $199 what a mark up. How much are the OME's? |
|
| Author: | KJ04 [ Sun Jan 20, 2008 11:22 am ] |
| Post subject: | |
JHCRASH wrote: KJ04 wrote: JHCRASH wrote: AZScout wrote: Doesn't JeepinbyAl have rear 4" springs? so rear springs and isolaters and then a clevis to help the front. How much are you sagging in the front? The OME front coils used by RRO on the CRD Rockfather I and II are the #927 400lb. rate, which differ from the new CRD #790 500 lb.rate that Al J's offers. My front springs are the 790's,(I went and looked at the box) It has not sagged at all not even when I put my bumper on. RRO offers them as the HD with front bumper CRD springs.Which they are HD thats for sure. RRO told me the REAR ones they make are heavier and taller than the OME's so you dont have to add any extra isolater pads.I can get them for $99 since i bought my lift there but for anyone else they are $199 what a mark up. How much are the OME's? I talked to someone named Charlie from RRO, and he said they didn't have the #790 OME coils and that they used #927's for the CRD. Guess he didn't know what he was talking about then. |
|
| Author: | JHCRASH [ Sun Jan 20, 2008 7:27 pm ] |
| Post subject: | |
I guess not. How can they not even know what they sell. Maybe I got mine by mistake
When did you speak to them I got my lift about 3 months ago is all. |
|
| Author: | KJ04 [ Sun Jan 20, 2008 7:36 pm ] |
| Post subject: | |
JHCRASH wrote: I guess not. How can they not even know what they sell. Maybe I got mine by mistake
When did you speak to them I got my lift about 3 months ago is all. I called then just last week. |
|
| Author: | JHCRASH [ Mon Jan 21, 2008 11:41 am ] |
| Post subject: | |
That is strange. Maybe they would sell more if they knew what they were selling. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|