Air intake

CarNutCertifies · **Posted:** Mon Jul 11, 2005 3:40 pm

Ok I have asked the usual tire, wheel, and lift question. But I dont see anything on air intake. On my 02 the air intake inlet is on the left side of my engine bay at the top of my rad. support. Some of the trails my buddy and I go on (haven't had the Lib out there yet) we nose dive down into a creek bed momentarly submerging his cherokee's front end. We then bounce out just as quickly as we go in. I am worried about water (being over the hood) getting in the intake. Is the setup designed well from the factory or is there something I need to do to modify it to keep water from getting in. It looks as though with the slope of the hood it wont be a problem. But i just figured i would aske to make sure.

Eddo · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 1214

As long as you are not under for long and the water level does not go above the throttle body you shoudl be fine. Also the air intake is designed in a U shape. I've had a little water splash over the hood a couple of times and have yet to get any water air box.

CarNutCertifies · **Posted:** Mon Jul 11, 2005 3:56 pm

I noticed that is seemed to be designed well i just didnt want to take the chance incase it wasnt if you know what i mean.

Air intake

Who is online