RRO Rockfather instruction sheet???

InCommando · **Posted:** Sat Mar 15, 2008 10:43 am

Does anyone have a RRO Rockfather intruction sheet than can scan/email me or something?

JHCRASH · **Posted:** Sat Mar 15, 2008 9:01 pm

Their lifts dont come with one. The lifts for the liberty are all pretty simple to install (other than compressing the front springs). What questions do you have I can walk you through some of the lift.

InCommando · **Posted:** Sat Mar 15, 2008 9:40 pm

Actually, with the wealth of info that is on here, I don't think I need a sheet. It's just that the invoice listed an instruction sheet, and I thought I was missing out :lol:

.

Actually, the real question I had was that it lists 2 strut spacers, yet I have four of them in the box?

KJ04 · **Posted:** Sun Mar 16, 2008 9:56 am

InCommando wrote:

Actually, with the wealth of info that is on here, I don't think I need a sheet. It's just that the invoice listed an instruction sheet, and I thought I was missing out :lol:

.

Actually, the real question I had was that it lists 2 strut spacers, yet I have four of them in the box?

What is the thickness of each one?

If each one is 3/8", I would only use one per side with the 927 springs.

PM me, and I'll send you my phone # for any questions you have on the install.

InCommando · **Posted:** Sun Mar 16, 2008 4:16 pm

KJ04, thanks for that offer. And you as well, JHcrash.

Each plate is 3/8". And thesprings are the 927's, but I do not have a bumper and/or winch. I just didn't know if they meant two plates per side = 1 plate as the invoice only indicated "2" plates.

KJ04 · **Posted:** Sun Mar 16, 2008 4:45 pm

InCommando wrote:

KJ04, thanks for that offer.

Each plate is 3/8". And thesprings are the 927's, but I do not have a bumper and/or winch. I just didn't know if they meant two plates per side = 1 plate as the invoice only indicated "2" plates.

So, you should have recieved;
1 pr. 927 coils
1 pr. 2.5" rear poly spacers
1 pr. 3/8" solid metal strut plate spacers
Sounds like whoever packed the box wasn't counting, so you got a bonus :lol:

InCommando · **Posted:** Sun Mar 16, 2008 6:50 pm

That is what I am thinking now. Free parts!

I have:

1 pr. 927 coils
1 pr. 2.5" rear poly spacers
2 pr. 3/8" solid metal strut plate spacers
1 pr. ext. shocks

It is killing me to have the lift sitting here and being stuck on putting it in. My hours just changed to "suck" this week ( 4p-mid Thurs & Fri, noon-mid Sat & Sun) &, with the holiday next weekend, I am having a little trouble getting it thrown on. Oh well. I still hope to have it on around the 1st of April.[

KJ04 · **Posted:** Sun Mar 16, 2008 7:55 pm

I'm still laid off!... Hope I'm back to work by April 1 st..

Cowpie1 · **Posted:** Sun Mar 16, 2008 8:47 pm

InCommando wrote:

Does anyone have a RRO Rockfather intruction sheet than can scan/email me or something?

Hey Don... Check your box that the springs came in. I included a copy of the instructions in there I believe. If not, send me a PM with your email again. I still have the file on my computer.

Cliff

InCommando · **Posted:** Sun Mar 16, 2008 9:44 pm

Thanks Cliff!

Folks, I gotta tell ya: Cliff has been A-1 to deal with throughout this transaction.

RRO Rockfather instruction sheet???

Who is online