| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| RRO Rockfather instruction sheet??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=30563 |
Page 1 of 1 |
| Author: | InCommando [ Sat Mar 15, 2008 10:43 am ] |
| Post subject: | RRO Rockfather instruction sheet??? |
Does anyone have a RRO Rockfather intruction sheet than can scan/email me or something? |
|
| Author: | JHCRASH [ Sat Mar 15, 2008 9:01 pm ] |
| Post subject: | |
Their lifts dont come with one. The lifts for the liberty are all pretty simple to install (other than compressing the front springs). What questions do you have I can walk you through some of the lift. |
|
| Author: | InCommando [ Sat Mar 15, 2008 9:40 pm ] |
| Post subject: | |
Actually, with the wealth of info that is on here, I don't think I need a sheet. It's just that the invoice listed an instruction sheet, and I thought I was missing out  .
Actually, the real question I had was that it lists 2 strut spacers, yet I have four of them in the box? |
|
| Author: | KJ04 [ Sun Mar 16, 2008 9:56 am ] |
| Post subject: | |
InCommando wrote: Actually, with the wealth of info that is on here, I don't think I need a sheet. It's just that the invoice listed an instruction sheet, and I thought I was missing out
.Actually, the real question I had was that it lists 2 strut spacers, yet I have four of them in the box? What is the thickness of each one? If each one is 3/8", I would only use one per side with the 927 springs. PM me, and I'll send you my phone # for any questions you have on the install. |
|
| Author: | InCommando [ Sun Mar 16, 2008 4:16 pm ] |
| Post subject: | |
KJ04, thanks for that offer. And you as well, JHcrash. Each plate is 3/8". And thesprings are the 927's, but I do not have a bumper and/or winch. I just didn't know if they meant two plates per side = 1 plate as the invoice only indicated "2" plates. |
|
| Author: | KJ04 [ Sun Mar 16, 2008 4:45 pm ] |
| Post subject: | |
InCommando wrote: KJ04, thanks for that offer.
Each plate is 3/8". And thesprings are the 927's, but I do not have a bumper and/or winch. I just didn't know if they meant two plates per side = 1 plate as the invoice only indicated "2" plates. So, you should have recieved; 1 pr. 927 coils 1 pr. 2.5" rear poly spacers 1 pr. 3/8" solid metal strut plate spacers Sounds like whoever packed the box wasn't counting, so you got a bonus
|
|
| Author: | InCommando [ Sun Mar 16, 2008 6:50 pm ] |
| Post subject: | |
That is what I am thinking now. Free parts! I have: 1 pr. 927 coils 1 pr. 2.5" rear poly spacers 2 pr. 3/8" solid metal strut plate spacers 1 pr. ext. shocks It is killing me to have the lift sitting here and being stuck on putting it in. My hours just changed to "suck" this week ( 4p-mid Thurs & Fri, noon-mid Sat & Sun) &, with the holiday next weekend, I am having a little trouble getting it thrown on. Oh well. I still hope to have it on around the 1st of April.[ |
|
| Author: | KJ04 [ Sun Mar 16, 2008 7:55 pm ] |
| Post subject: | |
I'm still laid off!... Hope I'm back to work by April 1 st.. |
|
| Author: | Cowpie1 [ Sun Mar 16, 2008 8:47 pm ] |
| Post subject: | Re: RRO Rockfather instruction sheet??? |
InCommando wrote: Does anyone have a RRO Rockfather intruction sheet than can scan/email me or something?
Hey Don... Check your box that the springs came in. I included a copy of the instructions in there I believe. If not, send me a PM with your email again. I still have the file on my computer. Cliff |
|
| Author: | InCommando [ Sun Mar 16, 2008 9:44 pm ] |
| Post subject: | |
Thanks Cliff! Folks, I gotta tell ya: Cliff has been A-1 to deal with throughout this transaction. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|