Anyone every heard of it or actually have it on there KJ. Just wondering.

http://www.ironmansuspension.com/jeepcherokeekj.html

_________________
$$$$
03 Liberty - Borla
2000 Dak Quad Cab - 31 Mich ATs

Check out the "down under" (AUS) site, some of the mates down there have used them I am pretty sure, they may chime in when the sun comes up over there again!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

They have a Canadian distributor http://www.sospiecesauto.ca

_________________
Brian, Blue KJ in PA
LOST#99, Mid-Atlantic LOST
Blue 2003 KJ Sport

RL Super Skinks

Yes and No.....

There have been a few guys down here that have put on the Ironman lift with mixed results, One guy got 1.5 - 1.75 inches of lift and thats all he wanted, (but was advertized as a 2.5in lift) another guy went up in the rear but got no lift whatsoever in the front, he had to then put in spacers in the front to get any lift. There is another guy right now (by Wedensday) having the lift put in, he actually told the Ironman guys of the feedback about the lift on Ausjeepoffroad.com (it not being very positive) and then they said they would send two different lifts and make sure all went right (bit of a reaction because the fella getting it done said he would post up the results on the Australian forum for all to see, so I think they want a positve review )

Old Man Emu is kinda the way most folks go, but, there is also another option. King Springs here in Australian make the OME stuff to specifications supplied by OME, now one of the KJ guys down here (you all know him as Ozltd) CRDSTU has had custom coils designed for the KJs to specifically address the issues of constant ride height and no sagging. He has specifically engineered a coil for the front end of the CRD that holds the front up even with bigg bullbars and winches and wont sag, as well to add to these he has just done a set of rear coils that specifically hold up the rear of the KJ even with a major load in the rear. (about 4in lift)

I am currently testing these rear coils and they are terrific, I will be putting up a post about the instal and how they perform offroad soon.

cmohr

_________________
SOME SAY

I'm Toight... Toight lik a Toiger.

And

When I go to the Toilet, Chuck Norris is there to tear the squares off for me.

"Pass me another one Chuck, and keep em coming!! On sencond thoughts..Go get the hose"

Yep, everything Cmohr said. Should be interesting to see what lift Dreams gets out of it.

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ

Howzit guys

I'm thinking about installing the Ironman kit here in South Africa. The system is rated quite highly here on the local forums. The fitment centre tell me that I'd get about 40mm lift (that's about 1.5")

We also have OME systems here but they are very expensive.

_________________
Jeep Cherokee 3.7 Ltd 2005
Ironman Suspension Lift
Bridgestone Dueler D694 245/70/16

Hey Ho

I just had the Ironman kit installed on my KJ

Got a 40mm lift in fron and a 70mm lift in rear, also had a set of Bridgestone Dueler D694 245/70/16 put on
Before

After


Next to a stock KJ


Ride is nice and firm, all I'll need to do is wait for it to settle then maybe do a clevis lift to level her off

_________________
Jeep Cherokee 3.7 Ltd 2005
Ironman Suspension Lift
Bridgestone Dueler D694 245/70/16