Does anyone have a line on replacement bushings for an "04 KJ? The shop is telling me all rear bushing need be replaced. Haven't checked yet myself as it's presently in the shop for other work but just wondering if there are replacements that are better than the OEM (if i'm going to replace them, might as well put in some good stuff).

Anybody?

_________________
'04 Renny
Mod's: See Avatar
Conquests: Poughkeepsie Gulch, Governor's Basin, Black Bear/Imogene/Engineer/Cinnamon pass, Coal Creek OHV, Badlands OHV, S.M.O.R.R., K-Rocks, Parent's driveway

What rear bushings? ...For the control arms?

If they aren't making noise, don't worry about it (I have not read one thread here about someone needing to change them)

_________________
Have fun out there.

2003 Cactus Green Renegade w/ NP231 & NV3550
Al's 4th Gen UCAs
Custom 3.5" Lift
Rear DTT
Spidertraxed 245/75/16 Maxxis Bighorns

Read elsewhere, rear control arm bushings and the rear upper ball joint do go bad. Just because you haven't read it on L.O.S.T. dosen't mean that the problem dosen't exist.

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/

He didn't ask about the ball joint. If and when the bushings go, it's no big deal. IMO it's pointless to replace them if they aren't showing signs of needing to be replaced (that is, squeaking).

Sounds to me that the shop is trying to make a quick buck.

_________________
Have fun out there.

2003 Cactus Green Renegade w/ NP231 & NV3550
Al's 4th Gen UCAs
Custom 3.5" Lift
Rear DTT
Spidertraxed 245/75/16 Maxxis Bighorns