| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Looking for measurements http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=32901 |
Page 1 of 1 |
| Author: | DoverKJ [ Fri May 30, 2008 10:33 am ] |
| Post subject: | Looking for measurements |
My 2004 KJ is expierencing some sagging with my Rusty's spring lift specifically the drivers side rear spring. I have and this lift on since Nov, 2004 and it has been wheeled hard. The KJ is not sitting level anymore and I am looking to possible replace or upgrade the suspension, just need to figure out is all the springs are sagging or just the one. If anyone has the Rusty's lift, can you please post measurements up on the approximate amount of lift you have. Thanks |
|
| Author: | Dje Ryu [ Fri May 30, 2008 2:28 pm ] |
| Post subject: | |
I'll measure mine later today for you. Don't know exactly where I was at before the lift so I can't really help with how much lift I got. |
|
| Author: | Jeep4me99 [ Fri May 30, 2008 2:35 pm ] |
| Post subject: | |
When i had the rusty's lift with no clevis i was at: drivers pinch weld - 1' 3" passengers pinch - 1' 3 3/8" |
|
| Author: | kj924 [ Fri May 30, 2008 4:03 pm ] |
| Post subject: | |
My measurements with 3/8 cleavis lift are: 35 3/4 from ground to fender flair --front 35 1/8 from ground to fender flair - rear |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|