| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Frankenlift on order http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=336 |
Page 1 of 1 |
| Author: | jnc91 [ Tue Jul 12, 2005 9:57 am ] |
| Post subject: | Frankenlift on order |
I just ordered the Frankenlift for my '02 KJ. I plan to install it myself. Can anyone provide me with a list of tools needed for the install. Thanks for your help. Jeff Collins |
|
| Author: | Skyjump136 [ Tue Jul 12, 2005 1:21 pm ] |
| Post subject: | |
Excellent choice! I don't remember needing anything too specialized. A good assortment of wrenches (especially a torque wrench), sockets, and a pry bar and you should be set. I do like to have a small sledge on hand to "persuade" those stubborn bolts. Also nice to have would be a handheld light and some wire for tying loose or hanging parts up and out of your way. Good luck with the install. If you run into questions along the way feel free to ask! |
|
| Author: | Guest [ Tue Jul 12, 2005 5:31 pm ] |
| Post subject: | |
I wasn't aware the "FrankenLift" was available as a kit? Or am I misunderstanding something? Can you or anyone tell me where I can view spec's on this lift and where it is sold. Thanks. |
|
| Author: | Skyjump136 [ Tue Jul 12, 2005 5:46 pm ] |
| Post subject: | |
Quinn at www.boulderbars.com can tell you everything you need to know. It isn't listed on their site so just give him a call (the phone # is on the site though). The beautiful thing about buying from Quinn is that he puts the front strut assemblies together for you...no spring compressor required! |
|
| Author: | Guest [ Tue Jul 12, 2005 5:51 pm ] |
| Post subject: | |
Thanks SkyJump! Ironically I just stumbled upon the post from Quinn. |
|
| Author: | LuckeyDuckey [ Tue Jul 12, 2005 6:21 pm ] |
| Post subject: | |
in case you don't have everything you need for the installation Autozone "rents" tools out. we needed a torque wrench when we intalled our disco's and the way it works is that you pay for the tool, in my case it was about $100 and you get it for around 3 months then you return it when your done (clean) and you get a complete refund. they seem to have the big things, but not little things like specific sockets or drill/tap sets. |
|
| Author: | InCommando [ Wed Jul 13, 2005 12:19 pm ] |
| Post subject: | |
So, what kind of $$$ does the frankenlift run? |
|
| Author: | Skyjump136 [ Wed Jul 13, 2005 1:13 pm ] |
| Post subject: | |
That's another good question for Quinn. I already had the Skyjacker rear coils and shocks so I only bought the front strut assemblies from him. I'm not sure what the whole kit goes for. |
|
| Author: | RespectMyLibertay [ Wed Jul 13, 2005 3:22 pm ] |
| Post subject: | I asked already. |
$750 with bumpstops all around. |
|
| Author: | jnc91 [ Thu Jul 14, 2005 7:15 pm ] |
| Post subject: | |
Rear springs and shocks came in today, front springs and struts are arriving tommorrow. I ordered Monday morning. Excellent service.... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|