LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Crown Automotive?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33866		 Page 1 of 1
Author:  Cobalt-60 [ Fri Jul 04, 2008 9:52 am ]
Post subject:  Crown Automotive?
Crown Automotive supplies 4.10 Dana 30a Ring & pinion sets (#5066085AA):

http://www.crownautomotive.net/catalog/ ... l30FKJ.htm

Trailquest has the Crown 4.10 Dana 30a Ring & pinion (#5066085AA) for $216.95 plus shipping:

http://www.trailquest.com/axles/KJ_Model30.shtml

Troy asked who produced these and the answer appears to be Crown Automotive themselves, not some overseas manufacturer.

So how reliable is Crown Automotive's stuff? Here is what Four Wheeler said in one of their JGC builds:

"We replaced our original unibearing hubs with a pair from Crown Automotive. We also installed new ball joints sourced from Crown in the steering knuckles. Definitely quality stuff from Crown, not some cheap off-shore knock-off. We have used a lot of Crown's products in the past and have been very pleased with the results. OK, you can't buy directly from Crown, but Quadratec is our supplier."

http://www.fourwheeler.com/projectbuild ... index.html

Does anybody have any experience (on any kind of rig) with Crown Automotive parts?
Author:  JJsTJ [ Fri Jul 04, 2008 10:17 am ]
Post subject: 
Dan over at GERROFFROAD.com is Our local Crown dealer on This forum. Give him a chance to get you a quote for anything Crown carries. He is a great guy that recently donated some goodies for our Big Bear event raffle.
Author:  gerroffroad [ Fri Jul 04, 2008 12:01 pm ]
Post subject:  Re: Crown Automotive?
Cobolt-60 wrote:
Crown Automotive supplies 4.10 Dana 30a Ring & pinion sets (#5066085AA):

http://www.crownautomotive.net/catalog/ ... l30FKJ.htm

Trailquest has the Crown 4.10 Dana 30a Ring & pinion (#5066085AA) for $216.95 plus shipping:

http://www.trailquest.com/axles/KJ_Model30.shtml

Troy asked who produced these and the answer appears to be Crown Automotive themselves, not some overseas manufacturer.

So how reliable is Crown Automotive's stuff? Here is what Four Wheeler said in one of their JGC builds:

"We replaced our original unibearing hubs with a pair from Crown Automotive. We also installed new ball joints sourced from Crown in the steering knuckles. Definitely quality stuff from Crown, not some cheap off-shore knock-off. We have used a lot of Crown's products in the past and have been very pleased with the results. OK, you can't buy directly from Crown, but Quadratec is our supplier."

http://www.fourwheeler.com/projectbuild ... index.html

Does anybody have any experience (on any kind of rig) with Crown Automotive parts?


Let me see if I can answer your questions for you.

Yes crown automotive carries 4:10 gears for the 30a and no they are not made by crown. They are made by dana spicer all gears sold by crown are made by dana spicer so they are made here in america. 90% of crowns parts are made by the same company that made the OEM part which insures the best quality and fit. The remainder is made by crown to oem or better specification.

I am a vendor for crown automotive and have also used many of their parts on my personal jeeps as well as customer jeeps and dodge vehicles with out any problems with the products, and the warranty program is top notch.
Author:  Cobalt-60 [ Fri Jul 04, 2008 12:51 pm ]
Post subject:  Re: Crown Automotive?
gerroffroad wrote:
Let me see if I can answer your questions for you.

Yes crown automotive carries 4:10 gears for the 30a and no they are not made by crown. They are made by dana spicer all gears sold by crown are made by dana spicer so they are made here in america. 90% of crowns parts are made by the same company that made the OEM part which insures the best quality and fit. The remainder is made by crown to oem or better specification.

I am a vendor for crown automotive and have also used many of their parts on my personal jeeps as well as customer jeeps and dodge vehicles with out any problems with the products, and the warranty program is top notch.


Wow, Dan, that is really good to know!!!! :D

Thank you for answering these questions so quickly -- I have been searching online for answers to this with no luck for about the past month!!!

You definitely will get a chance from me for anything I need from Crown in the future. I might also hit you up as a raffle sponsor for the LOST ECS next year. :wink:
Author:  USAFCOP [ Fri Jul 04, 2008 4:01 pm ]
Post subject: 
Rocklizard Fabrications has been getting crown parts for a while now too.
Author:  Rock Lizard [ Fri Jul 04, 2008 5:47 pm ]
Post subject: 
USAFCOP wrote:
Rocklizard Fabrications has been getting crown parts for a while now too.


Yep, I am a dealer as well, but I don't push their stuff enough to make it worth my time, but their quality is what I recommend for oem parts if you don't get them from napa. If you need crown parts, get them from gerroffroad. I will probably call them myself in the near future for a few oem parts I need.
Author:  Fouros [ Fri Jul 04, 2008 9:16 pm ]
Post subject: 
will the guys at gerroffroad ship to Australia ?
Author:  gerroffroad [ Fri Jul 04, 2008 10:10 pm ]
Post subject: 
Fouros wrote:
will the guys at gerroffroad ship to Australia ?


Well to be honest I never have shipped to there so I do not know what all it would take or cost. Id be willing to look into it though
Author:  Fouros [ Sat Jul 05, 2008 2:31 am ]
Post subject: 
please look at costs for shipping there is at least 5 guys i know of talking about 4.10 ratios for thier V6 Kj's
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/