LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Aluminum Diff Collar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=34998		 Page 1 of 1
Author:  nosnorb_808 [ Tue Aug 12, 2008 10:01 pm ]
Post subject:  Aluminum Diff Collar
Where can I get an aluminum diff collar from? Ive heard about it & how it supposed to strengthen the front diff. Someone please point me in the right direction.
Author:  06 KJ Sport [ Tue Aug 12, 2008 11:45 pm ]
Post subject: 
I second that motion...I broke the front diff while traveling down a snowy road and hitting a rock not seen because of the snow :x That was before the skids of coarse :shock: Thats also when I found out the Libbys dont come with factory skids :x THANKS MOPAR :evil:
Author:  Jeepjeepster [ Wed Aug 13, 2008 1:02 am ]
Post subject: 
06 KJ Sport wrote:
I second that motion...I broke the front diff while traveling down a snowy road and hitting a rock not seen because of the snow :x That was before the skids of coarse :shock: Thats also when I found out the Libbys dont come with factory skids :x THANKS MOPAR :evil:


Thats something that should of been checked before you went offroad.. :)
Author:  06 KJ Sport [ Wed Aug 13, 2008 1:38 pm ]
Post subject: 
:roll: It was a good road that I had been on before, but not in a vehicle with such low clearance. Could have been anybody :wink:
Author:  nosnorb_808 [ Sun Aug 17, 2008 6:12 pm ]
Post subject: 
Is everyone keeping this a secret or something? :?
Author:  tommudd [ Sun Aug 17, 2008 6:17 pm ]
Post subject: 
there have been several discussions on here hit search and see what comes up

if I had the number in front of me I would give it to you, but I got mine used :wink:
Author:  Khaki-KJ [ Sun Aug 17, 2008 6:23 pm ]
Post subject: 
One of the suppliers mentioned on LOST;
https://ec.kamandirect.com/projectfiles ... stid=46283

A quick search turned up these threads;
http://www.lostjeeps.com/forum/phpBB3/vie ... lar#266586

http://www.lostjeeps.com/forum/phpBB3/vie ... ar&start=0

type differential "and" collar into the search engine and it will come up with a lot more threads.
Author:  nosnorb_808 [ Sun Aug 17, 2008 6:27 pm ]
Post subject: 
I searched for aluminum diff collar & the results were endless. :lol: I was just looking through them. Thanks
Author:  Khaki-KJ [ Sun Aug 17, 2008 6:29 pm ]
Post subject: 
One more exploded diff thread with some cool Aussie pictures and mad (good skills if "mad" means something else downunder) Aussie mechanical skills :D ;

http://www.lostjeeps.com/forum/phpBB3/vie ... highlight=
Author:  Khaki-KJ [ Sun Aug 17, 2008 6:37 pm ]
Post subject: 
nosnorb_808 wrote:
I searched for aluminum diff collar & the results were endless. :lol: I was just looking through them. Thanks


If you use "and" in quotation marks between each word it will reduce the search results considerably. Just typing in aluminum diff collar means that the search engine is looking for one of the three words in every message, "and" means that all three words have to show up in every message. The entire search term in quotes means the exact sentence or search term has to show up in the message, which means you will get almost nothing, or nothing, for results. Hope that helps. :)
Author:  nosnorb_808 [ Sun Aug 17, 2008 6:44 pm ]
Post subject: 
From what I read it looks like the steel collars need to be machined out a little bit. I didnt notice anything about the aluminum collar having to be machined out. Did I miss anything? Just trying to figure what all is needed to install this collar.
Author:  BeepBeepJeepJeep [ Sun Aug 17, 2008 6:51 pm ]
Post subject: 
nosnorb_808 wrote:
From what I read it looks like the steel collars need to be machined out a little bit. I didnt notice anything about the aluminum collar having to be machined out. Did I miss anything? Just trying to figure what all is needed to install this collar.


If you buy a steel collar, the differences in metals may cause you issues down the road. I'd spend a little more and get the aluminum collar.
Author:  nosnorb_808 [ Sun Aug 17, 2008 7:00 pm ]
Post subject: 
Would be nice if someone had an extra for sale or a used one.
Author:  Khaki-KJ [ Sun Aug 17, 2008 7:08 pm ]
Post subject: 
Are you trolling for a group buy? :lol: If so, I am in for an aluminium one. Finding one up in BC was going to be my project this week. :)
Author:  nosnorb_808 [ Sun Aug 17, 2008 7:16 pm ]
Post subject: 
I am always trying to start up group buys. Still trying to get a group buy on L.O.S.T trail edition badges. :wink:
Author:  bobcat7 [ Mon Aug 18, 2008 11:04 pm ]
Post subject: 
I would be interested in the diff collar as well, always hard to get parts here in Saskatchewan.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/