scrambledKJ wrote:
tranny first gear is 3.0/1
transfercase low is 2.72/1
r&p gear is 3.73/1
crawl ratio is a whopping 30.4368
transfercase low is 2.72/1
r&p gear is 3.73/1
crawl ratio is a whopping 30.4368
Mine is 40.68
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD Crawl Ratio http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=35190 |
Page 1 of 1 |
| Author: | spencevans [ Tue Aug 19, 2008 12:05 am ] |
| Post subject: | CRD Crawl Ratio |
What was the stock crawl ratio for an 05 CRD? |
|
| Author: | spencevans [ Tue Aug 19, 2008 12:15 am ] |
| Post subject: | |
30:1, does that sound right? |
|
| Author: | scrambledKJ [ Tue Aug 19, 2008 8:16 am ] |
| Post subject: | ratio |
tranny first gear is 3.0/1 transfercase low is 2.72/1 r&p gear is 3.73/1 crawl ratio is a whopping 30.4368 |
|
| Author: | BeepBeepJeepJeep [ Tue Aug 19, 2008 9:17 am ] |
| Post subject: | Re: ratio |
scrambledKJ wrote: tranny first gear is 3.0/1
transfercase low is 2.72/1 r&p gear is 3.73/1 crawl ratio is a whopping 30.4368 Mine is 40.68
|
|
| Author: | spencevans [ Tue Aug 19, 2008 1:56 pm ] |
| Post subject: | |
Man, the Liberty's wheel pretty good for such a crappy crawl ratio. |
|
| Author: | bugnout [ Tue Aug 19, 2008 2:41 pm ] |
| Post subject: | |
Be nice to add the Rubicrawler from Advanced Adapters tjkj found tranny first gear is 3.0/1 transfercase low is 5.44/1 r&p gear is 4.10/1 New crawl ratio 66.912 |
|
| Author: | jason thompson [ Tue Aug 19, 2008 6:08 pm ] |
| Post subject: | |
spencevans wrote: Man, the Liberty's wheel pretty good for such a crappy crawl ratio.
30 is about on par with every thing else 4wd besides it means nothing until you factor in tires |
|
| Author: | Pablo [ Tue Aug 19, 2008 7:46 pm ] |
| Post subject: | |
The torque helps, as does the 1.9 torque multiplication factor of the torque converter (2.4 if you have Suncoast). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|