| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| List your KJ winch setup http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=36768 |
Page 1 of 2 |
| Author: | jamangus [ Tue Oct 14, 2008 9:58 pm ] |
| Post subject: | List your KJ winch setup |
Mount: bumber/backbone/etc Winch: make/model Fairlead: type Line: type/size/length Comments: how you like the setup, the good, the bad, etc Photo: everyone likes pictures... |
|
| Author: | callaway [ Tue Oct 14, 2008 10:11 pm ] |
| Post subject: | |
Mount: Backbone Winch: Smittybilt XRC8 Fairlead: Trail-Gear aluminum fairlead Line: 90' of 5/16" Viking Fireline Comments: Love the setup of the backbone, only downside to the smittybilt winch is the cheap powdercoat thats peeled off thanks to chicago weather Photo: 
|
|
| Author: | Dje Ryu [ Tue Oct 14, 2008 10:16 pm ] |
| Post subject: | Re: List your KJ winch setup |
jamangus wrote: Mount: bumber/backbone/etc
Winch: make/model Fairlead: type Line: type/size/length Comments: how you like the setup, the good, the bad, etc Photo: everyone likes pictures... I like this thread! 
Mount: Detours Backbone with intentions to build a bumper onto it when I can afford the steel Winch: Smittybilt XRC8 5.5hp series wound motor Fairlead: rollers Line: 50' of the cheap doo doo that comes on the XRC8 Comments: strong, fast winch. no clear mounting instructions. cheap booty line. 
|
|
| Author: | JL Rockies [ Tue Oct 14, 2008 10:19 pm ] |
| Post subject: | |
Mount: ARB winch bumper Winch: Mile Marker Fairlead: Roller Line: stock cable Comments: my only complaint is the stock cables to the control box were not long enough to remote it for a winch bumper. Luckily, I have a black belt in the 12V arts. 
|
|
| Author: | Xodius [ Tue Oct 14, 2008 10:34 pm ] |
| Post subject: | |
 Will post pics this weekend once it is all installed.
Mount: ARB winch bumper Winch: Warn M8000 Fairlead: Roller Line: 100' stock cable |
|
| Author: | JJsTJ [ Tue Oct 14, 2008 10:42 pm ] |
| Post subject: | |
Mount: All J bumper w/ JJ Made winch mount Winch: Warn x8000i Fairlead: aluminum Marlin Crawler fairlead (Toyota fairleads rule!) Line: 5/16 synthetic winch line by the A-hole that sells on ebay. (Avoid him) Comments: Love the look, I don't get stuck any more so not sure why I have it.  
Photo: 
|
|
| Author: | tjkj2002 [ Tue Oct 14, 2008 10:48 pm ] |
| Post subject: | |
WARN 9500XP 3/8"x100' of WARN syn rope fairlead that came with WARN rope ARB bumber Soon to be changed to 3/8"x100' of orange syn rope with a polished Armorology fairlead The WARN 9500XP works awesome,very powerful and very,very fast under load,wouldn't change a thing. 
|
|
| Author: | JeepinMaxx [ Tue Oct 14, 2008 11:35 pm ] |
| Post subject: | |
The original KJ backbone
SuperWinch EP 9000 MasterPull synthetic winch line with aluminum fair lead (old steel cable shown in photo) Awesome set-up - over two years of abuse with no problems |
|
| Author: | Tokyojoe [ Tue Oct 14, 2008 11:44 pm ] |
| Post subject: | |
Mount : None Winch: Mile Marker PE 8000 Roller: Fairlead Cable: stock wire cable Comments: Been sitting in its box in my living room for two years waiting for a front bumper to put it on. |
|
| Author: | riptricket [ Wed Oct 15, 2008 9:42 am ] |
| Post subject: | |
TJKJ how much did your winch cost you? |
|
| Author: | phxtoad [ Wed Oct 15, 2008 11:17 am ] |
| Post subject: | |
Detours backbone, Warn M8000, 100' steel line and roller. Hella's mounted to flat steel bar stock bolted to roller bracket. 
|
|
| Author: | tjkj2002 [ Wed Oct 15, 2008 8:38 pm ] |
| Post subject: | |
riptricket wrote: TJKJ how much did your winch cost you? $1000,$600 for the WARN rope(yes it was $$$,but made specifically for WARN winches).My new rope was $240(3/8"x100') and $75 for the new fairlead.
|
|
| Author: | Inc [ Wed Oct 15, 2008 8:45 pm ] |
| Post subject: | |
You are really going all out with the color them huh? |
|
| Author: | riptricket [ Wed Oct 15, 2008 8:48 pm ] |
| Post subject: | |
so your winch was $1000? where did ya get it? |
|
| Author: | tjkj2002 [ Wed Oct 15, 2008 8:54 pm ] |
| Post subject: | |
riptricket wrote: so your winch was $1000? 4 Wheel Parts in Tacoma WA.where did ya get it? Here is my winch,$1018 at winchdepot.com. http://www.winchdepot.com/PDT299191.aspx Quote: incubusmike Yep,wait till you see my completed SFA swap You are really going all out with the color them huh? .
|
|
| Author: | Inc [ Wed Oct 15, 2008 8:57 pm ] |
| Post subject: | |
Let me guess, orange riddler covers, orange springs, orange skids - what else? I am looking forward to it for sure. |
|
| Author: | JJsTJ [ Wed Oct 15, 2008 9:31 pm ] |
| Post subject: | |
tjkj2002 wrote: Yep,wait till you see my completed SFA swap .Aww come on now....You've been saying that for two years now!! Get on w/ it already!! I have already fallen off the edge of my seat twice and getting tired of holding my breath!
|
|
| Author: | Dje Ryu [ Wed Oct 15, 2008 9:32 pm ] |
| Post subject: | |
JJsKJ wrote: tjkj2002 wrote: Yep,wait till you see my completed SFA swap .Aww come on now....You've been saying that for two years now!! Get on w/ it already!! I have already fallen off the edge of my seat twice and getting tired of holding my breath! X2. Hurry up so I can get a belly skid already!
|
|
| Author: | tjkj2002 [ Wed Oct 15, 2008 9:41 pm ] |
| Post subject: | |
JJsKJ wrote: tjkj2002 wrote: Yep,wait till you see my completed SFA swap .Aww come on now....You've been saying that for two years now!! Get on w/ it already!! I have already fallen off the edge of my seat twice and getting tired of holding my breath!  ).
Now back on topic............. |
|
| Author: | Tokyojoe [ Wed Oct 15, 2008 9:50 pm ] |
| Post subject: | |
Good things come to those that wait.....SO HOLD YER BRITCHES, like me (*cough* bumper *cough*)!
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|