Mine does that too sometimes and I have a 2WD. It only happens when it is cold. Typically overnight, but sometimes after sitting long enough for the engine and/or tranny to get cold. Then if I get in, start it, and throw it in gear immediately, it will not move and then pop into motion like you mentioned. I have found that if I give it an extra 10 seconds to get all the fluids pumping before putting it in gear, I never have a problem. My guess is that the ATF has drained down and has to be re-circulated before it will move...
_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
