Are the gears on this site the proper ones??

_________________
'02 KJ sport
3.7 V6
45RFE/NP231J
Frankenlifted
Powertrax no-slip
Cook Bros. Diff guard
Skids front to back
RRO rock rails
10LB PowerTank
245/75-16 MT/R

yes, but last I knew those gears were on national backorder or something like that

I checked around at some dealerships by me for those and they were all charging anywhere from $300-500 , I think I did find one place that could get them for $250

but that is the correct p/n: 5066085AA

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

I just got a quote from the dealer for these. Part no. was 5066085ab
and price was $533.00.

_________________
2002 Jeep Liberty Sport with Trak-Loc
3" lift: OME struts, springs and shocks; Jeepin by Al UCAs and strut spacers
Full skids by Rusty's Offroad and Mopar
245/75/R16 Dunlop A/Ts on Procomp Soft 8s
A few lights and performance mods.

http://www.alphaomegaoffroad.com

Typically 5066085AB would just be the new number for 5066085AA. They should be exactly the same thing, just more expensive. The place with the 5066085AA part number probably doesn't have them, and will contact you after you order them to tell you the new part number and much higher price. That's been my experience multiple times.

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...