so Im ordering a daystar lift (as soon as all Js sends me the order form.) but hopefully this summer, when i get some work hours in, i can upgrade to a frankenlift. i saw that the franky uses a daystar top plate, so what kind of coin am i looking at to peice the rest of the lift together if i order them individually? and what parts other than the obvious OME coils, and rancho long travels will i need?

edit: and since im putting it together from scratch does anyone recommend a better shock than rancho or OME... just curious

650 bucks
2) OME 927s front
2) OME 948s rear
20 Rancho RSX 17004 rear
2) Rancho RSX 17505 front
2) Teraflex bumpstops Part # 0019301200 35 bucks or so for the front
rear bumpstops can make out of hockey pucks

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Basically what I've been working on the last couple of months.


2) OME 927s front - Check

2) Rancho RSX 17505 front - Check

2) OME 948s rear - Ordering tomorrow

2) Rancho RSX 17004 rear - Using the Skyjacker ones I have for now

2) Teraflex bumpstops Part # 0019301200 35 bucks or so for the front - Going to try and use the existing Daystar ones

2) rear bumpstops (can make out of hockey pucks) - Also have existing Daystar ones

Almost there!!

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501

The only thing that differs between the OME and gasser Franky is the Daystar top plate and the poly spacer underneath the OME coils.

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650