| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| frankenlift build http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=38926 |
Page 1 of 1 |
| Author: | KJ kyle [ Mon Jan 05, 2009 11:37 pm ] |
| Post subject: | frankenlift build |
so Im ordering a daystar lift (as soon as all Js sends me the order form.) but hopefully this summer, when i get some work hours in, i can upgrade to a frankenlift. i saw that the franky uses a daystar top plate, so what kind of coin am i looking at to peice the rest of the lift together if i order them individually? and what parts other than the obvious OME coils, and rancho long travels will i need? edit: and since im putting it together from scratch does anyone recommend a better shock than rancho or OME... just curious |
|
| Author: | tommudd [ Tue Jan 06, 2009 12:10 am ] |
| Post subject: | |
650 bucks 2) OME 927s front 2) OME 948s rear 20 Rancho RSX 17004 rear 2) Rancho RSX 17505 front 2) Teraflex bumpstops Part # 0019301200 35 bucks or so for the front rear bumpstops can make out of hockey pucks |
|
| Author: | 501 [ Tue Jan 06, 2009 12:58 am ] |
| Post subject: | |
Basically what I've been working on the last couple of months. 2) OME 927s front - Check 2) Rancho RSX 17505 front - Check 2) OME 948s rear - Ordering tomorrow 2) Rancho RSX 17004 rear - Using the Skyjacker ones I have for now 2) Teraflex bumpstops Part # 0019301200 35 bucks or so for the front - Going to try and use the existing Daystar ones 2) rear bumpstops (can make out of hockey pucks) - Also have existing Daystar ones Almost there!! |
|
| Author: | jeepkj02 [ Tue Jan 06, 2009 8:43 am ] |
| Post subject: | |
The only thing that differs between the OME and gasser Franky is the Daystar top plate and the poly spacer underneath the OME coils. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|