I am going to put a set of Hella Fog lights on the front bumper. Is there any particular spots I can not drill the holes due to the air bags or can I place the holes where I really want..

Thankss

_________________
2004 BRIGHT SILVER METALLIC KJ 3.7 Auto 4x4

K&N filter and Magnaflow muffler/exhaust

Tom-Tom GPS

Tail Lamp Gaurds

Hella Fog Lights

Wolo Air Horns

again
1 inch out from the grill
3.5 inches from where the bumper dips down towards the center should be about the right spot that will drill down through the frame and you can reach up through from the bottom and put the nut on

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

thanks for the info dude...going out to do it now.. haha

_________________
2004 BRIGHT SILVER METALLIC KJ 3.7 Auto 4x4

K&N filter and Magnaflow muffler/exhaust

Tom-Tom GPS

Tail Lamp Gaurds

Hella Fog Lights

Wolo Air Horns