| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rock rails http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=38948 |
Page 1 of 2 |
| Author: | kjsport05 [ Tue Jan 06, 2009 7:23 pm ] |
| Post subject: | rock rails |
so i just got the libby back from the body shop after i was hit (took them almost a month |
|
| Author: | KY Liberty [ Tue Jan 06, 2009 7:38 pm ] |
| Post subject: | |
Rocklizard Skink Super Sliders. They're extremely strong and well made. |
|
| Author: | kjsport05 [ Tue Jan 06, 2009 7:50 pm ] |
| Post subject: | |
KY Liberty wrote: Rocklizard Skink Super Sliders. They're extremely strong and well made.
i have heard about them but is their website down because i can't seem to get on it ... |
|
| Author: | jsc7002 [ Tue Jan 06, 2009 8:05 pm ] |
| Post subject: | |
either Boulder Bars or RL's Skinks I bought Rusty's and they are nice, its just if you want to take a chance with their customer service, but I bought them from Ebay so I could take action if I needed to and they were only $110 plus shipping |
|
| Author: | KY Liberty [ Tue Jan 06, 2009 9:42 pm ] |
| Post subject: | |
kjsport05 wrote: KY Liberty wrote: Rocklizard Skink Super Sliders. They're extremely strong and well made. i have heard about them but is their website down because i can't seem to get on it ... He's having problem with the people hosting his sight. He's still around though. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=38942 |
|
| Author: | ohv_kj [ Tue Jan 06, 2009 10:26 pm ] |
| Post subject: | |
custom ones made for 125$$ |
|
| Author: | dieselenthusiast [ Tue Jan 06, 2009 10:29 pm ] |
| Post subject: | There are rock rails, and then there are RL SLIDERS! |
RL, and don't look back............................. |
|
| Author: | tjkj2002 [ Tue Jan 06, 2009 10:31 pm ] |
| Post subject: | |
Yep just PM RL here or email him on his Yahoo account -RockLizardfab@yahoo.com-. The Skink Sliders are worth there weight in gold,tested them so hard RL thought I broke my passenger side rail on Chinaman's Gulch trail(slammed all 5500lbs on a rock,2' drop),but just a slight ding in the outer rail(I have the super skinks). |
|
| Author: | WoodysKJ [ Wed Jan 07, 2009 1:07 pm ] |
| Post subject: | |
x3 on the Rock Lizzards.
|
|
| Author: | Blue KJ in PA [ Wed Jan 07, 2009 1:26 pm ] |
| Post subject: | |
Super Skinks
|
|
| Author: | kjsport05 [ Wed Jan 07, 2009 4:37 pm ] |
| Post subject: | |
well i think i know which ones everyone would pick lol ... what is the approx cost on those? if i remember i think its around $415? |
|
| Author: | jsc7002 [ Wed Jan 07, 2009 4:56 pm ] |
| Post subject: | |
Rock Lizard Standard Skink Slider $305.00 (plus shipping) Skink Super Slider $415.00 (plus shipping) www.rocklizardfabrications.com Boulder Bars KJ Boulder Bars 2002-2006 $ 335.99 +Tax (CA) and S&H www.boulderbars.com Rusty's Off-Road KJ Rocker Panel Skids $279.00 www.rustysoffroad.com Rocky Road Jeep Liberty Rockrails 2002-2004 $289 Jeep Liberty Rockrails 2005-2007 $309 Jeep Liberty Superrails 2002-2004 $359 Jeep Liberty Superrails 2005-2007 $379 www.rocky-road.com |
|
| Author: | riptricket [ Wed Jan 07, 2009 8:07 pm ] |
| Post subject: | |
I agree with the RL Super Skink Sliders as well!!! [img]http://memimage.cardomain.com/member_images/8/web/2132000- 2132999/2132086_335_full.jpg[/img]
|
|
| Author: | Jeepjeepster [ Wed Jan 07, 2009 8:56 pm ] |
| Post subject: | |
ohv_kj wrote: custom ones made for 125$$
Thats a pretty good price! I had a hard time getting the steel to make mine for under $100. |
|
| Author: | nosnorb_808 [ Wed Jan 07, 2009 9:27 pm ] |
| Post subject: | |
Here a custom setup. This is Rubigades KJ. Just a thought I liked the idea.
[/img]
|
|
| Author: | durangotang [ Wed Jan 07, 2009 9:58 pm ] |
| Post subject: | |
Mine are from Carolina Rock Shop... They've held the CRD more than once without flinching...
|
|
| Author: | dieselenthusiast [ Wed Jan 07, 2009 11:21 pm ] |
| Post subject: | |
durangotang wrote: Mine are from Carolina Rock Shop... They've held the CRD more than once without flinching...
![]() Those look very similar to the RL sliders............... |
|
| Author: | durangotang [ Wed Jan 07, 2009 11:37 pm ] |
| Post subject: | |
I think they're pretty much identical other than no way of mounting to the pinch weld |
|
| Author: | Inc [ Wed Jan 07, 2009 11:42 pm ] |
| Post subject: | |
Custom ones for around $60 IIRC. |
|
| Author: | tpcosta [ Thu Jan 08, 2009 9:20 pm ] |
| Post subject: | |
Just another option, RRO Super sliders.
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|