LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Help I.D. these please...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39012
Page 1 of 1

Author:  long_tall_texan [ Thu Jan 08, 2009 1:52 pm ]
Post subject:  Help I.D. these please...

Anyone recognize what brand or type of springs these are? I will post the full number that is printed on the coil as soon as I get that info. I know they are Rancho shocks, but are those OME HD coils?

Image

Author:  long_tall_texan [ Thu Jan 08, 2009 1:53 pm ]
Post subject: 

The coils are from Rusty's, P/N ROR 901. Are those any good?

Author:  long_tall_texan [ Thu Jan 08, 2009 2:00 pm ]
Post subject: 

And now the UCAs: Which generation are these?

Image

Image

Author:  jsc7002 [ Thu Jan 08, 2009 2:05 pm ]
Post subject: 

long_tall_texan wrote:
The coils are from Rusty's, P/N ROR 901. Are those any good?


No, Rusty's coils uses the same spring rating as your OEM coils, just longer you could use them but you shouldn't add a bumper or winch and it will begin to sag w/o those on there

Author:  tommudd [ Thu Jan 08, 2009 2:35 pm ]
Post subject: 

Yep Rustys springs 300 lb spring rate
Arms are the Gen 3.5's The Gen 3's were all painted black I think , then went to 3.5s with the red powdercoating, check right where the arms are welded to the collar that has the ball joint pressed in, thats where the first set I bought used were cracked at. Of course they were the Gen 3's

Author:  Rock Lizard [ Thu Jan 08, 2009 3:58 pm ]
Post subject: 

Yep, 3.5 arms. Those have the pressed in boot and the thicker ball joint bung.

Author:  long_tall_texan [ Thu Jan 08, 2009 4:19 pm ]
Post subject: 

Well, They are all for sale. I found them on CL yesterday. Decided not to get them myself.

Details here:
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=39015

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/