| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Skids http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39018 |
Page 1 of 1 |
| Author: | Robbrez [ Thu Jan 08, 2009 5:39 pm ] |
| Post subject: | Skids |
Going to the junkyard soon to look for some skids for my 03 what will and wont fit on it from other years like a t-case skid from a 06 etc |
|
| Author: | HoppedUpOnGoofballs [ Thu Jan 08, 2009 5:45 pm ] |
| Post subject: | |
Only one that is changed is the engine skid on 05+.. The rest stayed the same. May be easier to just buy new, though, unless you get an awesome deal at the yard. |
|
| Author: | jsc7002 [ Thu Jan 08, 2009 6:11 pm ] |
| Post subject: | |
the Transfer case skid is also different |
|
| Author: | HoppedUpOnGoofballs [ Thu Jan 08, 2009 6:40 pm ] |
| Post subject: | |
jsc7002 wrote: the Transfer case skid is also different
Did not know that.. Thank you for pointing that out. |
|
| Author: | Robbrez [ Thu Jan 08, 2009 7:11 pm ] |
| Post subject: | |
HoppedUpOnGoofballs wrote: Only one that is changed is the engine skid on 05+.. The rest stayed the same.
May be easier to just buy new, though, unless you get an awesome deal at the yard. yeah im going to see if they have anything first just wanted to see what fit and what didnt...so everything 02 03 04 should fit then 05 and up engine and t-case dont fit |
|
| Author: | jsc7002 [ Thu Jan 08, 2009 7:28 pm ] |
| Post subject: | |
well they wont fit just perfect but they aren't that far off and most people will just make them fit, I would I wouldn't want to pay more for something I can make fit |
|
| Author: | Sport [ Fri Jan 09, 2009 10:52 am ] |
| Post subject: | |
one bolt hole in the back of the engine skid does not line up. Just need to tap a new line. I have an older model skid (beefier) on my 06 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|