| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Clevis Bolt Torque? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39069 |
Page 1 of 1 |
| Author: | lilblkblt04 [ Sat Jan 10, 2009 1:34 pm ] |
| Post subject: | Clevis Bolt Torque? |
Hey all, Looking at doing the Clevis lift tomorrow and get conflicting statements on the the torque for the Clevis bolt. I've seen 50-75-100. Can anybody confirm what it is exactly? Thanks, Ryan |
|
| Author: | 501 [ Sat Jan 10, 2009 1:46 pm ] |
| Post subject: | |
This article from the tech section, step by step clevis lift say's 100 lbs. |
|
| Author: | Jeepjeepster [ Sat Jan 10, 2009 3:57 pm ] |
| Post subject: | |
I torque everything I can get a torque wrench on to 100ft lbs besides the ball joints. Torque those to 60ft lbs. Sway bar, upper and lower clevis bolts, rear shock bolts, wheel lugs, all 100 ft lbs. Follow that guide, it will tell you whats what. |
|
| Author: | lilblkblt04 [ Sat Jan 10, 2009 7:18 pm ] |
| Post subject: | |
Thanks guys!! I'll try and post some pictures if I have time. Ryan |
|
| Author: | q50055 [ Mon Jan 12, 2009 8:33 pm ] |
| Post subject: | |
Depends on the version of clevis you have. I replaced the right front on my 2002 - the part# had a revision letter and a down sized bolt. Torque it to 100 ft lbs and it will surely break |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|