It is currently Mon Oct 27, 2025 5:48 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: 02-04 arb winch size
PostPosted: Thu Dec 25, 2008 10:28 pm 
Does anyone know the maximum winch dimensions that will fit in the 02-04 arb bumper? The winch dimensions of a winch i want are (LxWxH) 21.3" x 6.3" x 8.6". Will this winch fit? thanks.


Last edited by Guest on Fri Dec 26, 2008 6:00 am, edited 1 time in total.

Top
  
 
 Post subject:
PostPosted: Thu Dec 25, 2008 10:37 pm 
Also, i would appreciate it if someone could email me or send me the link for the installation instructions for the arb bull bar (02 - 05) because i just recently acquired a used bumper. thanks.


Top
  
 
 Post subject:
PostPosted: Fri Dec 26, 2008 4:25 pm 
To rephrase the question the winch specs are the same length and width as the warn M8000 but the height is 1 inch taller. I believe it will fit because someone i think said the smittybilt xrc 10 fits and it is the exact same dimensions as that.

here is the winch.The specs on this thing blow away the warn winch.


Top
  
 
 Post subject:
PostPosted: Fri Dec 26, 2008 9:49 pm 
Offline
clean machine
clean machine

Joined: Tue Oct 18, 2005 11:52 pm
Posts: 1211
icarl wrote:
Also, i would appreciate it if someone could email me or send me the link for the installation instructions for the arb bull bar (02 - 05) because i just recently acquired a used bumper. thanks.

If you still need these instructions I can email them to you. I have them scanned onto a file on my computer...


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 26, 2008 10:40 pm 
snowsport wrote:
icarl wrote:
Also, i would appreciate it if someone could email me or send me the link for the installation instructions for the arb bull bar (02 - 05) because i just recently acquired a used bumper. thanks.

If you still need these instructions I can email them to you. I have them scanned onto a file on my computer...


PM'ed you.


Top
  
 
 Post subject:
PostPosted: Sat Dec 27, 2008 12:05 pm 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
icarl wrote:
To rephrase the question the winch specs are the same length and width as the warn M8000 but the height is 1 inch taller. I believe it will fit because someone i think said the smittybilt xrc 10 fits and it is the exact same dimensions as that.

here is the winch.The specs on this thing blow away the warn winch.


i have the XRC10 and it did fit very well.


12000lb winch :shock: mine is 10,000lb and when in use it feels like the winch has no idea my KJ is even attached to it.

_________________
2006 Renegade. Completely stock.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Dec 27, 2008 3:54 pm 
Offline
LOST Member
User avatar

Joined: Wed Oct 08, 2008 11:11 pm
Posts: 431
Location: canada
Quote:
12000lb winch :shock: mine is 10,000lb and when in use it feels like the winch has no idea my KJ is even attached to it.


I got the same winch. For the money it cost compared to a 8k warn its worth it. if the winch is not working hard then it wont overheat and will go faster so you can use it more without worrying

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 15, 2009 12:34 am 
I got my arb bumper today and did some measuring. From what i can tell it looks like the max height is a little over 8" that could fit. This does not look promising for the winch i want. I'm wondering if the 05+ bull bar has a little bit more height in it for a winch to be able to fit the xrc 10.


Top
  
 
 Post subject:
PostPosted: Thu Jan 15, 2009 1:13 am 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
icarl wrote:
I got my arb bumper today and did some measuring. From what i can tell it looks like the max height is a little over 8" that could fit. This does not look promising for the winch i want. I'm wondering if the 05+ bull bar has a little bit more height in it for a winch to be able to fit the xrc 10.


mine was a tight fit.. but nothing too ridiculous

_________________
2006 Renegade. Completely stock.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 15, 2009 1:24 am 
i've contacted the winch supplier to see if he can give any more info on his winch. If its just the switch that sticks up 8.6" that could be worked around.


Top
  
 
 Post subject:
PostPosted: Thu Jan 15, 2009 2:44 am 
The winch supplier said the newer models 10 and 12k winches will be coming out Feb 10-12 and they are a lower profile (only 7-3/8" tall). So i may just have to wait until then. The current models may work but you would have to figure out what to do with the clutch handle which would probably stick up to high.


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com