Skid plates and front/rear recovery points 1st
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Newbie Question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39304 |
Page 1 of 1 |
| Author: | bizlimpkit [ Sat Jan 17, 2009 3:37 pm ] |
| Post subject: | Newbie Question |
i would like to know the cheapest/effective 4x4 mod that doesnt cost alot of moolah$$$..i am new to this and the only mod i have is a 2'' lift |
|
| Author: | NorCal KJ 707 [ Sat Jan 17, 2009 3:43 pm ] |
| Post subject: | |
New tires would be more effective for a lifted 4x4 over the stock ones if you still have them. Not really cheap though... |
|
| Author: | bizlimpkit [ Sat Jan 17, 2009 3:45 pm ] |
| Post subject: | |
yeah i got 245/75/16 BFG AT's alread..forgot to addd that |
|
| Author: | jsc7002 [ Sat Jan 17, 2009 4:17 pm ] |
| Post subject: | |
for off-road the Aussie 8.25" locker for $300 |
|
| Author: | LIV42DY [ Sat Jan 17, 2009 5:31 pm ] |
| Post subject: | |
Lock your rear and front dif. and you will be ahead of the game. |
|
| Author: | jsc7002 [ Sat Jan 17, 2009 5:36 pm ] |
| Post subject: | |
for your front diff, your only choices are the Detroit Truetrac and the ARB. I have the DTT and absolutely love it! |
|
| Author: | 2006 KJ [ Sat Jan 17, 2009 6:17 pm ] |
| Post subject: | |
jsc7002 wrote: for off-road the Aussie 8.25" locker for $300
x2 front and rear can get expensive.. for now if your looking for cheap i'd get the aussie and install it yourself (real easy) |
|
| Author: | jeepkj02 [ Sat Jan 17, 2009 8:42 pm ] |
| Post subject: | |
Remove rear sway bar Clevis Lift (if you haven't already) Additional rear upper iso pads If you have welder/welding skills you can make your own sliders and skid plates. |
|
| Author: | ohv_kj [ Sat Jan 17, 2009 9:20 pm ] |
| Post subject: | |
the rear sway bar never changed anything for me |
|
| Author: | tjkj2002 [ Sat Jan 17, 2009 9:31 pm ] |
| Post subject: | |
Skid plates and front/rear recovery points 1st
|
|
| Author: | 501 [ Sat Jan 17, 2009 9:37 pm ] |
| Post subject: | |
Scan through the Fabrication section, there are some cheap mods that you can do there. |
|
| Author: | bizlimpkit [ Sun Jan 18, 2009 2:52 pm ] |
| Post subject: | |
got skids and all that when i bought it so im prob just gunna go for the locker for the front diff..thanks for the help |
|
| Author: | jsc7002 [ Sun Jan 18, 2009 3:20 pm ] |
| Post subject: | |
bizlimpkit wrote: got skids and all that when i bought it so im prob just gunna go for the locker for the front diff..thanks for the help
the Detroit Turetrac? the p/n is DET912A585 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|