LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Who’s been neutered and how does it feel? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39346 |
Page 1 of 2 |
Author: | dieselenthusiast [ Sun Jan 18, 2009 9:55 pm ] |
Post subject: | Who’s been neutered and how does it feel? |
I've been thinking about taking my weight balancer off, but I keep thinking it’s there for a good reason. However, I haven’t heard anyone, thus far, who has noticed any ill-effect with it off. For those of you who are confused about what I’m talking about, I have posted a photo by long_tall_texan of your Jeep's testicles. It would be the bottom part in the photo. ![]() |
Author: | ramlebliberty [ Sun Jan 18, 2009 10:00 pm ] |
Post subject: | |
![]() ![]() |
Author: | dieselenthusiast [ Sun Jan 18, 2009 10:04 pm ] |
Post subject: | |
ramlebliberty wrote: :? my jeep has testicles
![]() Take a peak under your Jeep, and you will see them dangling. |
Author: | Christopher [ Sun Jan 18, 2009 10:28 pm ] |
Post subject: | |
Kept the sway bar but lost the wieghts. Havent noticed a thing. |
Author: | cfreelv711 [ Sun Jan 18, 2009 10:47 pm ] |
Post subject: | |
Weight balancer? ![]() ![]() ![]() |
Author: | Albert [ Sun Jan 18, 2009 11:32 pm ] |
Post subject: | |
Didn't know what to expect when I opened this thread......haha My jeep's got balls and it's staying that way....hahaha |
Author: | Jeepjeepster [ Mon Jan 19, 2009 12:05 am ] |
Post subject: | |
They are vibration dampeners. Same thing with the Ring around the rear DS that is supported by rubber(just like the testicles on the kj are). A large mass like that will absorb vibration. |
Author: | dieselenthusiast [ Mon Jan 19, 2009 12:14 am ] |
Post subject: | |
Jeepjeepster wrote: They are vibration dampeners. Same thing with the Ring around the rear DS that is supported by rubber(just like the testicles on the kj are). A large mass like that will absorb vibration.
Ring around the driveshaft? Do you have any pictures? And do you still have your testicles....err, vibration dampeners? |
Author: | Jeepjeepster [ Mon Jan 19, 2009 1:16 am ] |
Post subject: | |
Yea, mine are still there. Took them off to paint them once but thats its. Here you can see the ring around the DS, nice painted rear axle, testicles, etc. ![]() ![]() Before paint: ![]() |
Author: | long_tall_texan [ Mon Jan 19, 2009 1:50 am ] |
Post subject: | |
Obviously, from the initial pic posted, mine are now gone. Will report back if I notice any extra vibrations. |
Author: | Robocody [ Mon Jan 19, 2009 4:06 am ] |
Post subject: | |
Wow, I Hit a pretty big chunk of ice... About bucket sized, and it thumped fairly hard underneath, and now I have excess Vibration... Is it possible that I damaged one of those Dampeners? I got under there quick, and the major stuff like tranny pan, Axle and everything are not damaged, I ust didn't know to look at those... When it warms back up to 10F, I'll go out and have a loot. |
Author: | JJsTJ [ Mon Jan 19, 2009 8:57 am ] |
Post subject: | |
Both of my KJs were neutered long ago and never noticed any changes. |
Author: | XR [ Mon Jan 19, 2009 12:11 pm ] |
Post subject: | |
Still have the weights but haven't had a rear swaybar in 100K miles or so.I believe the u-joints are going and it's time to rotate the MT/Rs again so we'll take a looksee underneath today.Need to check a few things 'cause it seem to be a little loose on the rear end around corners. |
Author: | Jeepjeepster [ Mon Jan 19, 2009 12:51 pm ] |
Post subject: | |
Robocody wrote: Wow, I Hit a pretty big chunk of ice... About bucket sized, and it thumped fairly hard underneath, and now I have excess Vibration... Is it possible that I damaged one of those Dampeners? I got under there quick, and the major stuff like tranny pan, Axle and everything are not damaged, I ust didn't know to look at those... When it warms back up to 10F, I'll go out and have a loot.
Check out the Drive shaft(that long rusty thing in my pic) really good. Other than that, as long as you have the stock skids, not sure what else it could be. Bent rim if the tire hit it hard?? |
Author: | jeepmedic [ Mon Jan 19, 2009 1:50 pm ] |
Post subject: | |
My dog wasn't very happy when he lost his...think I'll leave them on the KJ ![]() |
Author: | ATXKJ [ Mon Jan 19, 2009 2:45 pm ] |
Post subject: | |
Jeepster - I've very surprised that you haven't painted and polished the driveshaft. it just seems to stand out as a concern ![]() ![]() ![]() |
Author: | Robocody [ Mon Jan 19, 2009 3:35 pm ] |
Post subject: | |
Yeah... I thought maybe a bent rim, I do have the steelies. I've since had my tires changed and balanced, so I assumed that the guys at the tire shop would have noticed... But they did seem to be in a major hurry to get me out of there. To the point of being rude. I think it was lunch time. The vibration did get better after the tire change, though it didn't go away completely. I'll have to take it to another tire place and have them check my rims out. |
Author: | LostRenegade [ Mon Jan 19, 2009 3:47 pm ] |
Post subject: | |
At first I thought you were talking about the big "V". ![]() ![]() What is the advantage of taking those off other than reducing weight? Does it really make a difference in anything? |
Author: | Fulltimer [ Mon Jan 19, 2009 4:00 pm ] |
Post subject: | |
LostRenegade wrote: At first I thought you were talking about the big "V".
![]() ![]() What is the advantage of taking those off other than reducing weight? Does it really make a difference in anything? Yes...it shoots blanks now! ![]() Terry |
Author: | BjBnet [ Mon Jan 19, 2009 6:14 pm ] |
Post subject: | |
ok, so if no one hasn't noticed anything different, why take it off? More clearance? |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |