Ok, I need some assistance. I currently have Rusty’s 2.5” lift. I want to know if I acquire some OME 927 (heavy Duty) can I just swap out the springs that came with the Rusty’s lift and add the OME springs? If not what else do I need in order to be able to add the OME 927? I’m not looking for a higher stance, I’m thinking of getting an ARB Bumper and I know I need OME heavy duty springs.

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877

tep just swap out the rustys and install the OME and then enjoy!

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

I kinda thought so but sounded too easy. Thanks for the quick response.

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877