LOST JEEPS :: View topic

I figured if I do go franky, I will go with the base franky. So there would be no height difference between the ome hd and the ome crd springs?

If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper.

I thought the Frankenlift only came with HD, if you can get MD you would be a little lower than one with the HD bc the coil rating is less. the HD will not give you a hard or harsh ride.

trailman wrote:

you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal.

jsc7002 wrote:

trailman wrote:

+1
My KJ is freaking awesome with the OME HD's holding up the front

Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on
rides like a...uh...a Jeep should!
tackles rough pavement and dirt roads without beating you up

Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it...

Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable

All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear

ThunderbirdJunkie wrote:

jsc7002 wrote:

trailman wrote:

All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear

Do you have a franky or just OME HD's up front. I'm thinking of yanking the spacer up front that came with the franky and replacing it with my stock iso. I could stand to lose an inch up front, I think that would make it ride better.

jsc7002 wrote:

I thought the Frankenlift only came with HD, if you can get MD you would be a little lower than one with the HD bc the coil rating is less. the HD will not give you a hard or harsh ride.

the HD springs will in fact give you what i believe is the best ride possible from your jeep liberty.

trailman wrote:

ThunderbirdJunkie wrote:

jsc7002 wrote:

trailman wrote:

All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear

If you do change it out, PM me and I will send where to ship it to :wink:

what do you want for it?
Tom

trailman wrote:

ThunderbirdJunkie wrote:

jsc7002 wrote:

trailman wrote:

All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear

If you do change it out, PM me and I will send where to ship it to :wink:

what do you want for it?
Tom

Author:	ObiHann [ Mon Jan 26, 2009 2:25 pm ]
Post subject:	franky lifts?
Is there any height difference between the different levels of franky lifts? Also, has anyone gone franky with the ome crd coils on a gasser? I think the sprints on the franky are the ome hd, so 450lbs spring rate right? and the crd are what 500? so other than a stiffer ride, any more height? or just a bad idea?

Author:	tommudd [ Mon Jan 26, 2009 2:37 pm ]
Post subject:
Are you getting an aftermarket bumper and winch? I think you would be fine with the regular Frankenlift with the Heavy Duty coils (OME 927) which are 400 LB where as OME CRD coils (OME790) are 500 LB no real difference in height, just in Rancho -vs- OME shocks which do not effect the height you get

Author:	ObiHann [ Mon Jan 26, 2009 3:02 pm ]
Post subject:
I figured if I do go franky, I will go with the base franky. So there would be no height difference between the ome hd and the ome crd springs?

Author:	jsc7002 [ Mon Jan 26, 2009 4:47 pm ]
Post subject:
ObiHann wrote: I figured if I do go franky, I will go with the base franky. So there would be no height difference between the ome hd and the ome crd springs? I wouldnt get the CRD coils unless you have a bumper AND a winch, but you could if you really wanted to, but I would buy the cheapest Franky there is, which I think is the one that comes with Ranchos all around.

Author:	tommudd [ Mon Jan 26, 2009 5:03 pm ]
Post subject:
The CRD Frankenlift is not as tall due to the CVs if I remember correctly

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

franky lifts? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39606	Page 1 of 5

Author:	ObiHann [ Mon Jan 26, 2009 7:52 pm ]
Post subject:
in the long term, I will be getting a bumper and a winch, so being able to support them would be nice.

Author:	teckman02 [ Mon Jan 26, 2009 8:02 pm ]
Post subject:
would the crd lift cause harm to the gasser kj if you did not do the do the bumper and winch right away.... because i have been thinking about the same thing

Author:	trailman [ Mon Jan 26, 2009 8:29 pm ]
Post subject:
If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper.

Author:	jsc7002 [ Mon Jan 26, 2009 8:37 pm ]
Post subject:
trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal.

Author:	dieselenthusiast [ Mon Jan 26, 2009 8:50 pm ]
Post subject:
2006 KJ swapped his front HD's for CRD coils and regained some of his heigth back. My front HD springs has dropped a little more than I expected with the ARB bumper and M8000 winch. Once I get my RL rear bumper installed, then I will reassess everything and decide what to do. There's always a chance that I might go with the CRD coils in the front.

Author:	DryBones [ Mon Jan 26, 2009 10:03 pm ]
Post subject:
so whats the difference in height/lift between a Franky with medium springs or just a set of HD springs?

Author:	jsc7002 [ Mon Jan 26, 2009 10:23 pm ]
Post subject:
I thought the Frankenlift only came with HD, if you can get MD you would be a little lower than one with the HD bc the coil rating is less. the HD will not give you a hard or harsh ride.

Author:	2006 KJ [ Tue Jan 27, 2009 12:14 am ]
Post subject:
jsc7002 wrote: I thought the Frankenlift only came with HD, if you can get MD you would be a little lower than one with the HD bc the coil rating is less. the HD will not give you a hard or harsh ride. the HD springs will in fact give you what i believe is the best ride possible from your jeep liberty.

Author:	Guest [ Tue Jan 27, 2009 12:19 am ]
Post subject:
jsc7002 wrote: trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal. +1 My KJ is freaking awesome with the OME HD's holding up the front Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on rides like a...uh...a Jeep should! tackles rough pavement and dirt roads without beating you up Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it... Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear

Page 1 of 5	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	trailman [ Tue Jan 27, 2009 12:45 am ]
Post subject:
ThunderbirdJunkie wrote: jsc7002 wrote: trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal. +1 My KJ is freaking awesome with the OME HD's holding up the front Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on rides like a...uh...a Jeep should! tackles rough pavement and dirt roads without beating you up Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it... Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear Do you have a franky or just OME HD's up front. I'm thinking of yanking the spacer up front that came with the franky and replacing it with my stock iso. I could stand to lose an inch up front, I think that would make it ride better.

Author:	tommudd [ Tue Jan 27, 2009 12:52 am ]
Post subject:
trailman wrote: ThunderbirdJunkie wrote: jsc7002 wrote: trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal. +1 My KJ is freaking awesome with the OME HD's holding up the front Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on rides like a...uh...a Jeep should! tackles rough pavement and dirt roads without beating you up Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it... Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear Do you have a franky or just OME HD's up front. I'm thinking of yanking the spacer up front that came with the franky and replacing it with my stock iso. I could stand to lose an inch up front, I think that would make it ride better. If you do change it out, PM me and I will send where to ship it to what do you want for it? Tom

Author:	Guest [ Tue Jan 27, 2009 12:54 am ]
Post subject:
I'm just running OMEs and some clevis lift.

Author:	dieselenthusiast [ Tue Jan 27, 2009 12:56 am ]
Post subject:
2006 KJ wrote: jsc7002 wrote: I thought the Frankenlift only came with HD, if you can get MD you would be a little lower than one with the HD bc the coil rating is less. the HD will not give you a hard or harsh ride. the HD springs will in fact give you what i believe is the best ride possible from your jeep liberty. Within the context of your bumper and winch, you're saying that your OME CRD coils DO NOT ride as good as your HD's. Meaning, if you could do it all over again, would you have kept your HD’s and added conduit nuts or other lift combinations to regain your height?

Author:	trailman [ Tue Jan 27, 2009 1:01 am ]
Post subject:
tommudd wrote: trailman wrote: ThunderbirdJunkie wrote: jsc7002 wrote: trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal. +1 My KJ is freaking awesome with the OME HD's holding up the front Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on rides like a...uh...a Jeep should! tackles rough pavement and dirt roads without beating you up Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it... Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear Do you have a franky or just OME HD's up front. I'm thinking of yanking the spacer up front that came with the franky and replacing it with my stock iso. I could stand to lose an inch up front, I think that would make it ride better. If you do change it out, PM me and I will send where to ship it to what do you want for it? Tom I'm still just thinking about it Tom, and if I do swap them out, I would have to test it out for a while to see if makes a difference before I would be willing to part with them. You'll be the first to know though.

Author:	jsc7002 [ Tue Jan 27, 2009 1:06 am ]
Post subject:
tommudd wrote: trailman wrote: ThunderbirdJunkie wrote: jsc7002 wrote: trailman wrote: If I were you guys I wouldn't even consider the CRD springs. I have the gasser HD coils and I wish I would have gotten the medium ones now because the HD's are just too stiff for a stock bumper, and it'll be a while before I get a bumper and wench. Plus the HD's lift my front end so high that there is hardly any room for droop, so my UCA's hit my spring bumpstops all the time. If you plan on getting a bumper and wench soon after the lift, then I would suggest just getting the HD coils. That's my experience with the franky anyway, maybe someone else has had better results with HD coils and a tupperware bumper. you are the first I have heard say that they wish they would have gotten the MD. I would just stick with the HD, when I add a winch I dont plan on changing out coils, Ill just have to add a little something to make up for it, but no big deal. +1 My KJ is freaking awesome with the OME HD's holding up the front Handles like a BMW X5 that somebody yanked the rear swaybar out of and put mud tires on rides like a...uh...a Jeep should! tackles rough pavement and dirt roads without beating you up Also, stock UCAs, no alignment issues to speak of ('cept for the bent pass side LCA...), UBJs are in good shape, only thing I can tell is the inner tie rod ends have a TINY bit of play...but it DOES have 122,000 HARD miles on it... Course, then again, maybe it's all that added weight of the front hitch that makes the OME HD ride bearable All this being said, I DO have the old, red Skyjacker coils out back...so I can't comment on OME HDs in the rear Do you have a franky or just OME HD's up front. I'm thinking of yanking the spacer up front that came with the franky and replacing it with my stock iso. I could stand to lose an inch up front, I think that would make it ride better. If you do change it out, PM me and I will send where to ship it to what do you want for it? Tom darn you beat me to it Tom! if for some odd non-Tom-ish reason he doesnt want them Ill buy them from you.