| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| anyone know how to fix this? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39789 |
Page 1 of 1 |
| Author: | Robbrez [ Sun Feb 01, 2009 3:16 pm ] |
| Post subject: | anyone know how to fix this? |
does anyone know how to get the red back into position because in this picture i am in park and the little red thing says im in drive..i can live with it but its just annoying i took the cover off thats around the whole thing but i cant figure out how to get it back into position 
|
|
| Author: | SweepnChoke [ Sun Feb 01, 2009 8:47 pm ] |
| Post subject: | |
Actually my wife has this exact issue in her Liberty Sport, she's been bitching that I do all this work on my Jeep and still haven't fixed that on hers. I haven't taken a good look at it yet, but if I get to it before you I'll let you know. http://www.cardomain.com/ride/2434197 |
|
| Author: | sleeve84028 [ Sun Feb 01, 2009 11:57 pm ] |
| Post subject: | |
You can try un-snapping the black cover off the PRNDL bezel and then resetting the indicator. Wait until it's warm out though because the plastic snaps could break. then you'll have to get out the silicone to put it back together. |
|
| Author: | DryBones [ Mon Feb 02, 2009 9:40 am ] |
| Post subject: | |
back before I knew better I had my wifes 02 sport in to a dealer for an alignment and when we got it back they had fixed that thing without us asking, no charge. They probably felt they raped us enough on the alignment! 
|
|
| Author: | 03kjsport [ Mon Feb 02, 2009 11:14 am ] |
| Post subject: | |
11 |
|
| Author: | lionseye640 [ Mon Feb 02, 2009 1:01 pm ] |
| Post subject: | |
I removed the black bezel, then stuck a piece of cardboard under the little red indicator & super glued it back together, removed cardboard & good as new (make sure to move it to the right location first). My indicator had broken off completely from the little black plastic tab it should be on. |
|
| Author: | ohv_kj [ Mon Feb 02, 2009 9:03 pm ] |
| Post subject: | |
mine is off...who cares...you don't look at a manual stick to shift...why do you need it for a auto... |
|
| Author: | RAYMAN975 [ Mon Feb 02, 2009 9:52 pm ] |
| Post subject: | |
that same thing happened to mine, i took that black plastic top piece off, took out the red piece, and put it back together |
|
| Author: | Robbrez [ Mon Feb 02, 2009 10:05 pm ] |
| Post subject: | |
RAYMAN975 wrote: that same thing happened to mine, i took that black plastic top piece off, took out the red piece, and put it back together
think that is what i am going to be doing...how did you get that plastic piece off? |
|
| Author: | corwyyn [ Tue Feb 03, 2009 12:37 am ] |
| Post subject: | |
Robbrez wrote: RAYMAN975 wrote: that same thing happened to mine, i took that black plastic top piece off, took out the red piece, and put it back together think that is what i am going to be doing...how did you get that plastic piece off? Got to looking at mine this morning while I was waiting for a doctor's appointment (I had read this thread before leaving home) and it looks like there are openings in each corner with a gray plastic tab that you would need to push in to release the cover. Didn't try it since I have no issues but it looked fairly straight-forward. EDIT: here is your image with the tabs circled. Just push those in and the cover should come off, then snap it back on when you're done. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|