daystar top plates

KJ kyle · **Posted:** Wed Feb 18, 2009 9:47 pm

does the daystar top plate itself gain any lift, or is the daystar lift a new top plate, as well as a coil spacer?

501 · **Posted:** Wed Feb 18, 2009 9:52 pm

Here is the Daystar top plate that came with my old kit:

They are upsidedown in the picture. The strut nut sits inside the 'cup' part so I'd say that it adds to your lift.

KJ kyle · **Posted:** Wed Feb 18, 2009 9:53 pm

so a small amount, but the "adverstised lift" comes from the spacer

501 · **Posted:** Wed Feb 18, 2009 9:56 pm

Yep.

Here's the stock setup next to the daystar when assembled.

KJ kyle · **Posted:** Wed Feb 18, 2009 9:58 pm

thanks daryl.

JeepinJarhead03 · **Posted:** Wed Feb 18, 2009 10:23 pm

maybe should post that pic of the springs with spacers in the lift section, or sticky this or something, thats the first time ive seen the springs assembled with spacer in comparasson to one without on the forum, i may have missed it though, either way would be a great addition to the lift info

0311_DoC · **Posted:** Wed Feb 18, 2009 11:06 pm

i wonder if this plus a clevis will help my front end becuz or my heavy AZZ bumper and soon to be winch...

KJ kyle · **Posted:** Wed Feb 18, 2009 11:24 pm

well what are you working with now?

KJ kyle · **Posted:** Wed Feb 18, 2009 11:29 pm

btw 501, are you using a daystar 2.5" lift paired with 1.5" OME springs? instead of the 3/4" poly spacer used in the frankenlift?

0311_DoC · **Posted:** Wed Feb 18, 2009 11:36 pm

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

501 · **Posted:** Thu Feb 19, 2009 12:40 am

KJ kyle wrote:

btw 501, are you using a daystar 2.5" lift paired with 1.5" OME springs? instead of the 3/4" poly spacer used in the frankenlift?

No I took off the Daystar, put OME HD's with the Daystar top plate and a 2 ring Clevis in front and the OME HD's and 1 extra ISO in the rear.

jsc7002 · **Posted:** Thu Feb 19, 2009 1:31 am

0311_DoC wrote:

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

this is what Ill get in the summer when I add some more lift to my KJ and add a winch.

http://jeepinbyal.com/prod-JBA_Spring_Ring-589.aspx

0311_DoC · **Posted:** Thu Feb 19, 2009 1:36 am

jsc7002 wrote:

0311_DoC wrote:

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

this is what Ill get in the summer when I add some more lift to my KJ and add a winch.

http://jeepinbyal.com/prod-JBA_Spring_Ring-589.aspx

hmm no pic on Als site. wonder what it does and looks like....

jsc7002 · **Posted:** Thu Feb 19, 2009 1:38 am

0311_DoC wrote:

jsc7002 wrote:

0311_DoC wrote:

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

this is what Ill get in the summer when I add some more lift to my KJ and add a winch.

http://jeepinbyal.com/prod-JBA_Spring_Ring-589.aspx

hmm no pic on Als site. wonder what it does and looks like....

Im not sure it kind of sounds just like a piece of 1/4 thick x 3 ID x 4.31 OD metal lol but I dont know.

501 · **Posted:** Thu Feb 19, 2009 1:42 am

jsc7002 wrote:

0311_DoC wrote:

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

this is what Ill get in the summer when I add some more lift to my KJ and add a winch.

http://jeepinbyal.com/prod-JBA_Spring_Ring-589.aspx

If I was listening correctly when I was over in Ohio, RAYMAN975 has them on his rig.

jsc7002 · **Posted:** Thu Feb 19, 2009 1:49 am

501 wrote:

jsc7002 wrote:

0311_DoC wrote:

KJ kyle wrote:

well what are you working with now?

I have the Franky premium II, but I also have a CRD and a Trail Ready bumper at 110# plus a M8000 winch I just need a lil push to get er back up a tad.

this is what Ill get in the summer when I add some more lift to my KJ and add a winch.

http://jeepinbyal.com/prod-JBA_Spring_Ring-589.aspx

If I was listening correctly when I was over in Ohio, RAYMAN975 has them on his rig.

Re-he-he-eally? Ill have to ask him about it then, thanks for the heads up!

501 · **Posted:** Thu Feb 19, 2009 1:50 am

jsc7002 wrote:

501 wrote:

Re-he-he-eally? Ill have to ask him about it then, thanks for the heads up!

No prob Joey!

ObiHann · **Posted:** Thu Feb 19, 2009 7:44 am

How much would these top plates add? I know not much, but still, .25" .5"?

tommudd · **Posted:** Thu Feb 19, 2009 8:08 am

ObiHann wrote:

How much would these top plates add? I know not much, but still, .25" .5"?

rule of thumb if you use a 1/4 inch spacer you get 1/2 inch of lift , whatever you use on the front to lift it is doubled

this is interesting :lol:

tonycrd · **Posted:** Thu Feb 19, 2009 9:24 am

JSC, I shouldn't bother fitting those rings, you need to take the topplate of again so compress the springs again etc. Compressing the spring more is not going to improve your ride quality, believe me...been there.

Fit some 1/4 Rusty plates on top of the strut. Done.

And:

501's pic has been added to the lift FAQ.

daystar top plates

Who is online