LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

POWERTRAX LOCKERS
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=40535		 Page 1 of 2
Author:  ridah011 [ Sun Feb 22, 2009 11:05 pm ]
Post subject:  POWERTRAX LOCKERS
Does anyone know anything or have these lockers? I know they make a rear, but do they make a front? Also, I have read that they don't make noise, but have read that lockers make a "clicking" sound, anyone know if they do or don't and what is available for the KJ, princing and where to get them?
Author:  Inc [ Sun Feb 22, 2009 11:11 pm ]
Post subject: 
i have one for the rear. There is a member on here that is going to try and install one in his front end. He'll be the first to see if it works or not. I do not hear any clicking at all in my rear locker. Every once in a while it will make a pop sound but that is it. I love mine.
Author:  ridah011 [ Sun Feb 22, 2009 11:18 pm ]
Post subject: 
is the one you have a powertrax?
Author:  Inc [ Sun Feb 22, 2009 11:19 pm ]
Post subject: 
ridah011 wrote:
is the one you have a powertrax?

yes
Author:  Troysterr [ Mon Feb 23, 2009 12:43 am ]
Post subject: 
I've had my Powertrax for a few years now, and it works great. It bangs and pops and grabs from time to time, but you get used to it.

Whenever my locker makes my KJ drive strange, I just remember how great it works in Moab.

I didn't know they made one for the D30a.
Author:  Inc [ Mon Feb 23, 2009 1:16 am ]
Post subject: 
Troysterr wrote:
I've had my Powertrax for a few years now, and it works great. It bangs and pops and grabs from time to time, but you get used to it.

Whenever my locker makes my KJ drive strange, I just remember how great it works in Moab.

I didn't know they made one for the D30a.

It isn't for the D30a, it is for the D30 but he is going to try and see if it will or make it fit r something.
Author:  KJ04 [ Mon Feb 23, 2009 1:20 am ]
Post subject:  Re: POWERTRAX LOCKERS
ridah011 wrote:
Does anyone know anything or have these lockers? I know they make a rear, but do they make a front? Also, I have read that they don't make noise, but have read that lockers make a "clicking" sound, anyone know if they do or don't and what is available for the KJ, princing and where to get them?


Powertrax makes the Locrite and the No-slip.
The No-slip is more street friendly. My No-slip has been in 4+yrs. with no noises yet.
The majority of us here use the Detroit True Trac limited slip up front.
Author:  ridah011 [ Mon Feb 23, 2009 9:42 am ]
Post subject: 
Do either of the two wear out the gears sooner? Also what is the model for the KJ for the front?
Author:  jsc7002 [ Mon Feb 23, 2009 12:35 pm ]
Post subject: 
ridah011 wrote:
Do either of the two wear out the gears sooner? Also what is the model for the KJ for the front?


D30, 27 spline, 3.73+ gears
if you want the DTT the pn is DET912A585, its on sale here:
http://www.4wheelparts.com/Drivetrain-D ... DET912A585
Author:  Back-n-Black [ Mon Feb 23, 2009 12:54 pm ]
Post subject: 
Troysterr wrote:

I didn't know they made one for the D30a.


Just for the sake of argument niether does Detroit. As the DTT everyone uses is for a D30. 8)
Author:  oddball [ Mon Feb 23, 2009 6:04 pm ]
Post subject: 
I have both the Powertrax (rear) and DTT (front) and have yet to hear any clicking out of either locker.
Author:  Guest [ Mon Feb 23, 2009 9:55 pm ]
Post subject: 
You won't hear any clicking out of the DTT because it is not a locker :roll:
Author:  ridah011 [ Tue Feb 24, 2009 1:22 am ]
Post subject: 
Right, its a limited slip. How exactly does it work and why would you get one since it doesn't lock?
Author:  tjkj2002 [ Tue Feb 24, 2009 1:26 am ]
Post subject: 
ridah011 wrote:
Right, its a limited slip. How exactly does it work and why would you get one since it doesn't lock?
The DTT is a gear driven LSD,it has more torque bias then any other LSD,which means it "locks" more,or it actually takes more torque to unlock it.You can also easily fool the DTT into "locking" like a real locker by applying the brakes a little.Did it all the time when I had my DTT in the front diff of my KJ.Plus you do not need to add and friction modifier since it does not have any clutches and will not wear out like clutched based LSD's.The DTT is great for the front,the Detroit Locker or ARB is the best 2 choices for the rear in my opinion.
Author:  ridah011 [ Tue Feb 24, 2009 9:51 am ]
Post subject: 
so most seem to run the DTT in the front because they don't make a true locking diff for the KJ, is that right or am I just under that impression?
Author:  ridah011 [ Tue Feb 24, 2009 10:28 am ]
Post subject: 
anyone know anything about the aussie front lockers? I have found one for under $300 shipped, good deal not sure how good they are. i have read that they are good, i just don't want any clicking when i'm not wheeling
Author:  jsc7002 [ Tue Feb 24, 2009 12:36 pm ]
Post subject: 
ridah011 wrote:
anyone know anything about the aussie front lockers? I have found one for under $300 shipped, good deal not sure how good they are. i have read that they are good, i just don't want any clicking when i'm not wheeling


Aussie says its not for use in the front axle now Ive heard some good things about it for the rear 8.25, the only traction aids that we know work in the front of the KJ are the DTT and the ARB. The DTT works great, I have one and I love it.
Author:  ridah011 [ Tue Feb 24, 2009 6:03 pm ]
Post subject: 
what is run in the front diff of the KJ, it's the D30 right or is it the D30a? How many splines is it 27 for the front? Aussie makes a front locker for the D30, 27 spline and would fit if thats whats in there but i'm not sure.
Author:  ridah011 [ Tue Feb 24, 2009 6:07 pm ]
Post subject: 
http://www.jeeperz-creeperz.com/aussie- ... 76435.html

this is a link, to where they mention KJ owner's to check if you have "the Dana 30A or Next Generation Differential the XD13027 does not fit that carrier". So if you have a the D30, it should fit is what I'm getting from what it says.
Author:  jsc7002 [ Tue Feb 24, 2009 6:51 pm ]
Post subject: 
all KJs have the D30a, but when you buy a locker or DTT you buy one for a D30, 27 spline, 3.73 and up.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/