LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

anyone have aftermarket shocks?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=40667		 Page 1 of 1
Author:  KJ kyle [ Thu Feb 26, 2009 12:03 am ]
Post subject:  anyone have aftermarket shocks?
i need to know the expanded, and collapsed length of the rancho rear RSX 17004. or another aftermarket rear shock for lifted KJs
Author:  tonycrd [ Thu Feb 26, 2009 12:59 pm ]
Post subject: 
Maybe this helps?

Rancho........OME......JEEP...
Image
Author:  KJ kyle [ Thu Feb 26, 2009 1:25 pm ]
Post subject: 
not really, i need to know the collapsed length, because im looking at getting rear shocks, but they dont have specific applications, they just say expanded and compressed length, so i need something to compare to, I think INC is helping me out though.
Author:  Inc [ Thu Feb 26, 2009 4:28 pm ]
Post subject: 
I'll have those #s for you later. For those shocks we were discussing earlier I took their part # and searched it on Summit Racing's site and they have compressed, extended and stroke measurements. Helped me a bunch.
Author:  0311_DoC [ Fri Feb 27, 2009 4:38 pm ]
Post subject: 
Image

OMEN23L Length open (extended) 630mm approx 24.80 inches

OMEN32L length closed (compressed) 395mm approx 15.55 inches
Author:  KJ kyle [ Fri Feb 27, 2009 5:11 pm ]
Post subject: 
thats exactly what i was looking for, but isnt OME N23L the wrong shock??
Author:  0311_DoC [ Fri Feb 27, 2009 5:14 pm ]
Post subject: 
KJ kyle wrote:
thats exactly what i was looking for, but isnt OME N23L the wrong shock??


those are what I have on my rears...
Author:  KJ kyle [ Fri Feb 27, 2009 6:04 pm ]
Post subject: 
I found the same specs on all Js website for the OME 132L. so that means if anyone is interested in these edelbrock shocks on sale right now for the rear of your frankenlift, you need the 63906 extreme IAS. it has the soft valving for the lighter weight vehicles. and the specs are within an inch of the OMEs both directions. Im ordering a set tomorrow.
Author:  tommudd [ Fri Feb 27, 2009 6:20 pm ]
Post subject: 
whats a lighter weight vehicle?
Author:  KJ kyle [ Fri Feb 27, 2009 6:22 pm ]
Post subject: 
they dont give any specific numbers, but considering the medium valving is for alot of full size trucks and diesels i think the soft valves should be about right for the KJs weight
Author:  calamaridog [ Wed Mar 04, 2009 3:04 am ]
Post subject: 
Bilstein 5125 part number BE5-A462-H5 should fit for the lifted rear application and have the right valving.

This is a 9.25" travel shock with 255/70 valving. The measurements are extended 24.35" and compressed 15.11". About a .5" difference from the OME L shock.

I haven't tried them yet but I may when I lift it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/