That's the right PN
you can usually get them for 40+ship new
there was a salvage site that had them for like friggin 15 bucks but I've lost the link
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| tranny skid plate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=43611 |
Page 1 of 1 |
| Author: | kingjeep [ Thu May 28, 2009 9:28 am ] |
| Post subject: | tranny skid plate |
dose any one know the part number for the kj tranny skid that i would use on an 02 kj i know it needs to be tweeked to fit |
|
| Author: | kingjeep [ Thu May 28, 2009 9:32 am ] |
| Post subject: | |
almost forgot the dealership is giving it to me at about caust same price they chage the employees but the parts guy can not find the part number since it was not made for all the years |
|
| Author: | JL Rockies [ Thu May 28, 2009 1:30 pm ] |
| Post subject: | |
The Mopar tranny skid is what I had and failed on a mountain leaving me stranded for hours in a blizzard and hail storm. They're alot cheaper than the good ones though. |
|
| Author: | kingjeep [ Thu May 28, 2009 1:42 pm ] |
| Post subject: | |
ok first of ljrokys im not doing the same type of wheeling as you just looking to have somthing instead of nothing some of the guys have said they can fab one up for me but dont know if thats a good idea second i will take sugestions if any one knows where to get a better one |
|
| Author: | kingjeep [ Thu May 28, 2009 1:54 pm ] |
| Post subject: | |
I think i found it ill post it just incase any one els is looking for it Part # 82210003 I got the number from a guy selling it on ebay so im not postive this is the right one but the dealership is cheking the price for me now ill keep you posted |
|
| Author: | JeepinJarhead03 [ Thu May 28, 2009 3:45 pm ] |
| Post subject: | |
That's the right PN you can usually get them for 40+ship new there was a salvage site that had them for like friggin 15 bucks but I've lost the link
|
|
| Author: | oddball [ Thu May 28, 2009 8:02 pm ] |
| Post subject: | |
kingjeep wrote: second i will take sugestions if any one knows where to get a better one
Assuming I understood you correctly... http://www.skidplates.com/Products_KJ.asp |
|
| Author: | Cobalt-60 [ Thu May 28, 2009 9:33 pm ] |
| Post subject: | |
oddball wrote: Assuming I understood you correctly... http://www.skidplates.com/Products_KJ.asp
x2 |
|
| Author: | JL Rockies [ Fri May 29, 2009 12:24 am ] |
| Post subject: | |
Those are what I am replacing my Mopar with until Marty completes his. |
|
| Author: | kingjeep [ Tue Jun 02, 2009 11:44 am ] |
| Post subject: | |
just picked it up got a deal any way what do i have to do to it to make it fit my 02 |
|
| Author: | JL Rockies [ Tue Jun 02, 2009 12:24 pm ] |
| Post subject: | |
Pretty sure you have to drill holes where none exist now and mount it with a bolt and nut. |
|
| Author: | kingjeep [ Tue Jun 02, 2009 9:36 pm ] |
| Post subject: | |
o thats not a big deal ill take care of that when i take to to dino for the lift he will probably just use nut serts and tack them in place |
|
| Author: | Haole [ Tue Jun 02, 2009 10:00 pm ] |
| Post subject: | skids |
the holes line up here and there. just find whatever hole you want, then drill holes where there are none. not really a big deal. I freaked out when i first started drilling holes. but now, ive had this jeep apart in so many different places and ways, drilling holes here and there are the least of my worries.  the mopar plates are nice, theyre better than nothing at all... but a better Tcase skid would be nice. that sumbiscuit seems flimzy. The trans skid i got was doubled up, seemed the best skid of them all. hmm. i dunno. at least these are light. adds a bit of insurance i guess. i didnt go wheelin anywhere until i had full skids under there. not worth it, the pates are relatively cheap. all i need now are some supersliders.  cant wait for those.
|
|
| Author: | tumanator [ Tue Jun 02, 2009 11:16 pm ] |
| Post subject: | |
oddball wrote: kingjeep wrote: second i will take sugestions if any one knows where to get a better one Assuming I understood you correctly... http://www.skidplates.com/Products_KJ.asp Ouch 319 bucks for just the fuel tank skid.... time for a 3rd job? |
|
| Author: | JeepinJarhead03 [ Tue Jun 02, 2009 11:20 pm ] |
| Post subject: | |
300 bucks is only about 100 bucks more than the mopar tank skid, and depending on what year KJ ya got the tank skid can be hard to find i personally like the Kilby gas skid which someone has for sale in the sale section by the way |
|
| Author: | tumanator [ Tue Jun 02, 2009 11:28 pm ] |
| Post subject: | |
$200 for the Mopar? Proly from the stealership. For the price of the good skid plate you could almost get a full set shipped from here. Yes I know their not as good but anything's better than nothing. http://jeeppartspeople.com/SearchProduct.asp?Model=Liberty&catid=3354539933449889&year=05&productdesc=Skid+Plates |
|
| Author: | JeepinJarhead03 [ Tue Jun 02, 2009 11:37 pm ] |
| Post subject: | |
my bad! this was the tank skid i was thinkin of, and you're right it's about 100 bucks http://jparts.com/product_info.php?prod ... 8a71e5eab4 i have trouble trusting 'gauge steel' since it's just sheet metal already crumbled my tranny skid
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|