thanks mudd. always a great help. have you ever done any of your own line-xing?? i take it you know where this is going
. need to know if there is products out there for the DIY guy ?? what can you recommend or if anyone else has some experiences
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| side rails http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=43866 |
Page 1 of 1 |
| Author: | rt_power [ Fri Jun 05, 2009 8:57 am ] |
| Post subject: | side rails |
wondering what the procedure is for taking the roof side rails off?? one of mine is starting to show some wear and im thinking of painting them. im assuming the other pieces are bolted through the roof and the head liner would need to come out |
|
| Author: | tommudd [ Fri Jun 05, 2009 9:06 am ] |
| Post subject: | |
very easy to do 5 minute job open up the front door and you will see where the two pieces of plastic bracket come togethere gently pry between the two kind of forward and out and it comes apart then you will see the two bolts, rear the same way |
|
| Author: | Boiler [ Fri Jun 05, 2009 9:10 am ] |
| Post subject: | |
You only have to open the doors to get access to the outer parts. There is nothing to do inside the vehicle. When you pry the outer half of the plastic away from the inner half, be very careful with your prying. It is easy to ding up the plastic just by inserting your screwdriver, and you can also crack/break parts of it. I used a very thin screw driver in cunjunction with a thicker one, to kind of work my way up the seam. If it feels like its too hard to pry open, start from a different spot. |
|
| Author: | rt_power [ Fri Jun 05, 2009 9:17 am ] |
| Post subject: | |
thanks mudd. always a great help. have you ever done any of your own line-xing?? i take it you know where this is going . need to know if there is products out there for the DIY guy ?? what can you recommend or if anyone else has some experiences
|
|
| Author: | rt_power [ Fri Jun 05, 2009 9:22 am ] |
| Post subject: | |
and thats what she said sorry boiler, i couldn't resist. im not usually this chipper in the morning
|
|
| Author: | Boiler [ Fri Jun 05, 2009 10:24 am ] |
| Post subject: | |
I believe you can buy cans of DIY bedliner type material, and I think I saw some at Wal-Mart. I can't attest to their quality. Inc did his rack (and roof) with "plastikote", you may ask him about it. I hope he doesn't mind me linking his pictures... Pics of his roof: 
 [/quote]
His whole thread: http://www.lostjeeps.com/forum/phpBB3/pos ... e&p=462936 |
|
| Author: | tommudd [ Fri Jun 05, 2009 10:49 am ] |
| Post subject: | |
any of that stuff you have to checkout and see what type of UV protection it has if any, some does not and will over time turn greyish almost white as it fades. |
|
| Author: | tumanator [ Fri Jun 05, 2009 11:09 am ] |
| Post subject: | |
Everyone will recommend a different product, just do like tom said and look into which one you think is best. Here's the website of the stuff I used, it's epoxy base is supposed to let it be more flexible than other liners. http://www.dominionsureseal.com/productsdetails.asp?id=215&catid=35 |
|
| Author: | JeepinJarhead03 [ Fri Jun 05, 2009 4:38 pm ] |
| Post subject: | |
I just noticed Mike has 3 cross bars on what looks to be stock side rails?? 
now to go sifting through the fab section to see how he did that 
|
|
| Author: | Inc [ Sat Jun 06, 2009 12:25 am ] |
| Post subject: | |
4 cross rails welded on my stock Renny side rails. Works awesome. The Plastikote I have used on various parts of my jeep is over a year old and hasn't faded yet. It might, but no signs of it yet. Good stuff. |
|
| Author: | timmyb457 [ Sat Jun 06, 2009 1:21 am ] |
| Post subject: | |
i might have to borrow that idea for a rack instead of buying one seems like a great idea to me |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|