It is currently Thu Mar 28, 2024 8:15 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 45 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Liberty Lift FAQ / please read before asking questions
PostPosted: Wed May 24, 2017 11:36 pm 
Offline
LOST Member

Joined: Thu Mar 30, 2017 9:12 am
Posts: 246
I don't see this question/answer:
Which rear shocks to use for a Liberty CRD with 4 inches of lift? Any recommendations?


Top
 Profile  
 
 Post subject: Re: Liberty Lift FAQ / please read before asking questions
PostPosted: Thu May 25, 2017 8:42 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Science and Energy wrote:
I don't see this question/answer:
Which rear shocks to use for a Liberty CRD with 4 inches of lift? Any recommendations?

jeepinbyal lists the shocks which fit the 2.5-4 inch lifts etc

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Liberty Lift FAQ / please read before asking questions
PostPosted: Thu Dec 28, 2017 1:49 pm 
Offline
LOST Newbie

Joined: Wed Jul 10, 2013 2:27 pm
Posts: 20
I am not a gearhead here, but I have a good tech to work on my 05 CRD.

Three years ago, I put an OME 2.5" lift and put on 245/75/R16 tires. No rubbing, hammered the joint.

This year, my wheel hubs needed replacing and my front tires were badly worn on the inside. I put on my stock 225/75/R16 snow tires. My question is: is that tire wear the result of bad camber from the shorter upper control arms? Would JBA UCA's allow a "stock" alignment and solve the problem?

Thanks!

2.5" OME, ARB front bumper, GDE, Webasto, 001 thermostat

_________________
GDE eco - OME 3" - ARB bumper


Top
 Profile  
 
 Post subject: Re: Liberty Lift FAQ / please read before asking questions
PostPosted: Thu Dec 28, 2017 4:47 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4962
Location: Green Cove Springs FL
You probably just need an alignment.
Rotating your tires every 3-4 months wouldn’t hurt either.

_________________
U.S. Army Retired


Top
 Profile  
 
 Post subject: Re: Liberty Lift FAQ / please read before asking questions
PostPosted: Tue Jun 01, 2021 5:16 pm 
Offline
LOST Newbie

Joined: Thu May 02, 2019 1:36 pm
Posts: 66
An update: not sure if ARB/OME changed their production from when these numbers were originally posted a few years back but here is the information straight from ARB on current (2021) OME products for the KJ:

Front
0. Stock spring - 320#/in
1. Light spring - 375#/in 385mm height
2. Medium spring - 375#/in 392mm height
3. Heavy spring - 400#/in 394mm height, thicker coils

Rear
0. stock spring - 150#/in
1. light spring - 170#/in, 340mm height
2. Medium spring - 200#/in, 340mm height, thicker coils


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 45 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com